BS ISO 13373-2:2016推荐了处理和呈现振动数据和数据的程序 分析振动特征，以监测旋转机械的振动状况 并根据需要进行诊断。针对不同的需求描述了不同的技术 应用。信号增强技术和分析方法，用于研究 包括特殊的机器动态现象。其中许多技术可以应用于 其他机器类型，包括往复式机器。以下参数的示例格式: 也给出了用于评估和诊断目的的常用绘图。在分析振动时，ISO 13373的这一部分基本上分为两种基本方法 信号:时域和频域。改进诊断方法的一些方法 还包括通过改变操作条件得到的结果。ISO 13373的本部分仅包括振动条件下最常用的技术 机器的监控、分析和诊断。还有许多其他技术用于确定 适用于更深入振动分析和诊断调查的机器行为 除了正常的机械状态监测。对这些问题的详细描述 技术超出了ISO 13373本部分的范围，但其中一些更先进的特殊技术 目的技术在第5条中列出，以获取更多信息。对于特定的机器类型和尺寸，ISO 7919和ISO 10816系列为 宽频带振动震级在状态监测中的应用，以及其他文件，如 VDI 3839提供了有关机器特定问题的附加信息，这些问题可在以下情况下检测到: 进行振动诊断。交叉引用:ISO 1683ISO 2041ISO 2954ISO 5348ISO 7919ISO 10816ISO 10817-1ISO 13372ISO 16063-21ISO 18431ISO 20816VDI 3839-1购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS ISO 13373-2:2016 recommends procedures for processing and presenting vibration data and analyzing vibration signatures for the purpose of monitoring the vibration condition of rotating machinery, and performing diagnostics as appropriate. Different techniques are described for different applications. Signal enhancement techniques and analysis methods used for the investigation of particular machine dynamic phenomena are included. Many of these techniques can be applied to other machine types, including reciprocating machines. Example formats for the parameters that are commonly plotted for evaluation and diagnostic purposes are also given.This part of ISO 13373 is divided essentially into two basic approaches when analysing vibration signals: the time domain and the frequency domain. Some approaches to the refinement of diagnostic results, by changing the operational conditions, are also covered.This part of ISO 13373 includes only the most commonly used techniques for the vibration condition monitoring, analysis and diagnostics of machines. There are many other techniques used to determine the behaviour of machines that apply to more in-depth vibration analysis and diagnostic investigations beyond the normal follow-on to machinery condition monitoring. A detailed description of these techniques is beyond the scope of this part of ISO 13373, but some of these more advanced special purpose techniques are listed in Clause 5 for additional information.For specific machine types and sizes, the ISO 7919 and ISO 10816 series provide guidance for the application of broadband vibration magnitudes for condition monitoring, and other documents such as VDI 3839 provide additional information about machinery-specific problems that can be detected when conducting vibration diagnostics.Cross References:ISO 1683ISO 2041ISO 2954ISO 5348ISO 7919ISO 10816ISO 10817-1ISO 13372ISO 16063-21ISO 18431ISO 20816VDI 3839-1All current amendments available at time of purchase are included with the purchase of this document.