BS EN 16820:2017适用于D型和SD型软管组件，软管由弹性体制成 以及用于运输空气中的气体、蒸汽、液体或粉状物质的粘结塑料 制药和生物技术产业。它规定了分类、制造和维护 软管组件的测试以及材料、要求和质量监督。这些软管总成旨在与相关物质一起在环境温度下使用 温度范围为-30°C至+100°C，具体取决于介质，工作压力范围为-0.9 bar （真空）至10巴（见表2和表3）。对于内衬由PTFE和衍生物制成的软管， 允许温度在-30°C到+140°C之间。符合本标准的软管组件分为两种设计，A和B（见3.3）。需要注意的是，对于某些应用，相关的法律法规，如 需要遵守压力设备指令2014/68/EU（PED）。交叉引用:ISO 5817:2014 ED3ISO 7326:2016EN ISO 8031（ISO 8031:2009）ASEN ISO 14021（ISO 14021:2016）ASISO 188:2011 Ed 5ISO 8033:2016EN ISO 10619-1（ISO 10619-1:2011）ASISO 8331:2016ISO 10993-5:2009EN ISO 7326（ISO 7326:2016）ASEN 1092-1EN 12115:2011EN 10270-1:2011EN 12351:2010EN 10244-2:2009ISO 37:2011 Ed 5BS 3592-1:1986EN ISO 5817（ISO 4671）ASEN 20071402:2009 Ed 4ISO 4671:2007 Ed 3EN 10204:2004EN ISO 7233（ISO 7233:2016）ASISO 10619-2:2011 Ed 1EN ISO 8033（ISO 8033:2016）ASISO 7233:2016ISO 8031:2009 Ed 3ISO 1817:2015 ED6EN 10270-2:2011EC/TS 60079-32-1:2013 ED1EN ISO 10619-2（ISO 10619-2:2011）ASISO 10619-1:2011 Ed 1EN 10088-3:2014EN ISO 8331购买本文件时提供的信息包括在内。

BS EN 16820:2017 applies to type D and type SD hose assemblies with hoses made of elastomers and bonded plastics for the transport of gaseous, vaporous, liquid or powdery substances in the pharmaceutical and the biotechnological industries. It specifies the classification, manufacturing and testing of as well as the materials, requirements and quality surveillance for hose assemblies.These hose assemblies are intended to be used with the relevant substances at temperatures in the range from -30 °C to +100 °C, depending on the medium, and at operating pressures from -0,9 bar (vacuum) to 10 bar (see Tables 2 and 3). For hoses with a lining made of PTFE and derivatives, temperatures from -30 °C to +140 °C are permissible.Hose assemblies in accordance with this standard are classified into two designs, A and B (see 3.3).Attention is called to the fact that for certain applications the relevant legal regulations such as the Pressure Equipment Directive 2014/68/EU (PED) need to be complied with.Cross References:ISO 5817:2014 ED3ISO 7326:2016EN ISO 8031 (ISO 8031:2009) ASEN ISO 14021 (ISO 14021:2016) ASISO 188:2011 Ed 5ISO 8033:2016EN ISO 10619-1 (ISO 10619-1:2011) ASISO 8331:2016ISO 10993-5:2009EN ISO 7326 (ISO 7326:2016) ASEN 1092-1EN 12115:2011EN 10270-1:2011EN 12351:2010EN 10244-2:2009ISO 37:2011 Ed 5BS 3592-1:1986EN ISO 5817 (ISO 5817:2014) ASEN ISO 4671 (ISO 4671:2007)ASISO 1402:2009 Ed 4ISO 4671:2007 Ed 3EN 10204:2004EN ISO 7233 (ISO 7233:2016) ASISO 10619-2:2011 Ed 1EN ISO 8033 (ISO 8033:2016) ASISO 7233:2016ISO 8031:2009 Ed 3ISO 1817:2015 ED6EN 10270-2:2011IEC/TS 60079-32-1:2013 ED1EN ISO 10619-2 (ISO 10619-2:2011) ASISO 10619-1:2011 Ed 1EN 10088-3:2014EN ISO 8331 (ISO 8331:2014) ASEN 10088-2:2014EN ISO 10993-5 (ISO 10993-5:2009) ASAll current amendments available at time of purchase are included with the purchase of this document.