屏蔽用铜包铝合金线
Copper-clad aluminium alloy wires for shield

2013-11-28

屏蔽用铜包铝合金线
Copper-clad aluminium alloy wires for shield

2014-05-12

线缆编织用铝合金线
Aluminium alloy wires for cable braiding

2009-10-30

Aluminium and aluminium alloys. Scrap-Wire and cable scrap
铝和铝合金 碎片电线电缆废料

2003-05-01

Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires
架空线路导线.铝镁硅合金线

2000-11-21

架空绞线用铝-镁-硅系合金圆线
Aluminium-magnesium-silicon alloy wire for overhead line conductors

2009-03-19

电缆导体用铝合金线
Aluminium alloy wires for conductors of insulated cables

2014-05-06

Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap
铝和铝合金.废料.第3部分:电线和电缆废料；德文版EN 13920-3:2003

2003-08-01

알루미늄 및 알루미늄 합금－스크랩－제3부：전선 및 케이블 스크랩
铝及铝合金废料第3部分:电线电缆废料

2015-12-30

Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap
铝和铝合金废料第3部分:电线电缆废料

2003-10-31

Наконечники кабельные из алюминиевого сплава для оконцевания алюминиевых жил проводов и кабелей сваркой. Конструкция и размеры
铝合金电缆鞋用于通过焊接倾斜铝线导体和电缆 施工和尺寸

EN 4400-5. Aerospace series. Aluminium and aluminium- and magnesium-alloy products. Technical specification. Part 5: Aluminium and aluminium alloy rivet wire
EN 4400-5 航空航天系列 铝及铝镁合金产品 技术规格 第5部分:铝及铝合金铆钉线

2003-04-15

Specification for wire for solid, cold-forged rivets of aluminium-5% magnesium alloy (not exceeding 10 mm diameter)
铝-5%镁合金（直径不超过10mm）实心冷锻铆钉用钢丝规范

1971-08-31

Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3)
铝-铜-镁合金（直径不超过10mm）实心冷锻铆钉用钢丝规范（Cu 2.5 Mg 0.3）

1971-08-31

Aluminium-Magnesium-Silicon Alloy Wire for Overhead Line Conductors (Adopted CEI/IEC 60104:1987, second edition, 1987-12, with Canadian deviations)
架空线路导线用铝镁硅合金线（采用CEI/IEC 60104:1987 第二版 1987-12 加拿大偏差）

2003-03-01

Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-silicon-manganese alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A)
铝-铜-镁-硅-锰合金（固溶处理和自然时效条件下使用）（直径不超过10 mm）实心冷锻铆钉用线材规范（Cu 4.4 Mg 0.5 Si 0.7 Mn 0.8）（2014A）

1990-01-31