BS EN 1119:2009-塑料管道系统玻璃纤维增强热固性塑料（GRP）管和配件的接头带弹性密封件的非抗推力柔性接头的密封性和抗损坏性试验方法-国家数字标准馆

现行 BS EN 1119:2009

到馆阅读

收藏跟踪

购买正版

Plastics piping systems. Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements 塑料管道系统玻璃纤维增强热固性塑料（GRP）管和配件的接头带弹性密封件的非抗推力柔性接头的密封性和抗损坏性试验方法

发布日期： 2009-04-30

取代双编号标准BS EN 1119:1996、BS 2782-12:方法1223C:1996。购买本文件时可获得的所有当前修订均包含在购买本文件中。

Replaces the dual numbered standard BS EN 1119:1996, BS 2782-12:Method 1223C:1996.All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS PD ISO/TS 10986-2021

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. System design of above ground pipe and joint installations without end thrust
塑料管道系统玻璃纤维增强热固性塑料（GRP）管无端推力地上管道和接头装置的系统设计

ISO/TS 10986-2021

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — System design of above ground pipe and joint installations without end thrust
塑料管道系统玻璃纤维增强热固性塑料（GRP）管.无端推力地上管道和接头装置的系统设计

JIS K 7036-1998

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints
塑料管道系统玻璃纤维增强热固性塑料（GRP）管和配件螺栓法兰接头设计的试验方法

BS EN 1450-1997

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of bolted flange joints
塑料管道系统玻璃纤维增强热固性塑料（GRP）组件证明螺栓法兰接头设计的试验方法

UNE-EN 1450-1997

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) COMPONENTS. TEST METHODS TO PROVE THE DESIGN OF BOLTED FLANGE JOINTS.
塑料管道系统玻璃纤维增强热固性塑料（GRP）组件证明螺栓法兰接头设计的试验方法

UNE-EN 1450/A1-1999

PLASTICS PIPING SYSTEMS - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) COMPONENTS - TEST METHODS TO PROVE THE DESIGN OF BOLTED FLANGE JOINTS
塑料管道系统.玻璃纤维增强热固性塑料（GRP）部件.螺栓法兰接头设计的试验方法

JIS K 7042-1998

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of cemented or wrapped rigid joints
塑料管道系统玻璃纤维增强热固性塑料（GRP）管及配件硬质或包裹硬质接头设计的试验方法

BS EN 1449-1997

Plastics piping systems. Glass reinforced thermosetting plastics (GRP) components. Test methods to prove the design of cemented socket-and-spigot joints
塑料管道系统玻璃纤维增强热固性塑料（GRP）组件证明水泥承插接头设计的试验方法

UNE-EN 1449-1997

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) COMPONENTS. TEST METHODS TO PROVE THE DESIGN OF CEMENTED SOCKET-AND-SPIGOT JOINTS.
塑料管道系统玻璃纤维增强热固性塑料（GRP）组件证明水泥承插接头设计的试验方法

BS PD ISO/TS 20656-1-2017

Plastics piping systems. General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes-Buried pipes
塑料管道系统玻璃纤维增强热固性塑料（GRP）管结构设计通则

BS ISO 10928-2016

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
塑料管道系统玻璃纤维增强热固性塑料（GRP）管道和配件回归分析方法及其应用

BS EN 1393-1997

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial longitudinal tensile properties
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始纵向拉伸性能的测定

BS EN 1228-1997

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial specific ring stiffness
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始比环刚度的测定

UNE-EN 1228-1996

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL SPECIFIC RING STIFFNESS.
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始比环刚度的测定

JIS K 7032-2002

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始比环刚度的测定

UNE-EN 705-1995

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES AND FITTINGS. METHODS FOR REGRESSION ANALYSES AND THEIR USE.
塑料管道系统玻璃纤维增强热固性塑料（GRP）管道和配件回归分析方法及其应用

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use
塑料管道系统玻璃钢管道和管件回归分析方法及其应用

플라스틱 배관 시스템 — 유리 섬유 강화 열경화성 플라스틱(GRP) 관 — 원주 방향 초기 비강성의 측정
塑料管道系统 - 玻璃增强热固性塑料（grp）管道 - 初始特定环刚度的测定

플라스틱 배관 시스템 — 유리 섬유 강화 열경화성 플라스틱(GRP) 관 및 이음관 — 회귀분석법과 활용
塑料管道系统 - 玻璃增强热固性塑料（GRP）管道和配件 - 回归分析方法及其应用

UNE-EN 1393/AC-1998

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL LONGITUDINAL TENSILE PROPERTIES.
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始纵向拉伸性能的测定

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统