BS 09/30179109 DC适用于包括一个或多个E/E系统的安全相关系统 安装在最大总重不超过3.5 t的批量生产乘用车中。BS 09/30179109不适用 解决特殊用途车辆（如为残疾驾驶员设计的车辆）中独特的E/E系统问题。 在BS 09/30179109发布日期之前开发的系统不在该范围内。BS 09/30179109 DC解决了E/E安全相关系统故障行为可能造成的危险 包括这些系统的相互作用。它不解决触电、火灾、烟雾、高温、， 辐射、毒性、易燃性、反应性、腐蚀、能量释放和类似危险，除非直接 由E/E安全相关系统的故障行为引起。BS 09/30179109 DC未涉及E/E系统的标称性能，即使是专用功能 这些系统有性能标准（例如主动和被动安全系统、制动器 系统，ACC）。BS 09/30179109 DC规定了支持过程的要求。其中包括 分布式开发中的接口、安全要求的总体管理、配置 管理、变更管理、验证、文件编制、软件工具的鉴定、 软件组件、硬件组件的鉴定和使用证明。交叉引用:ISO 10007:2003ISO 16949ISO 26262-1ISO 26262-2ISO 26262-3ISO 26262-4ISO 26262-5ISO 26262-6ISO 26262-7ISO 26262-9IEC 61508ISO 16750IEEE Std 830:1998ISO 15504购买本文件时提供的所有当前修订版均包括在内。

BS 09/30179109 DC is intended to be applied to safety-related systems that include one or more E/E systems and that are installed in series production passenger cars with a max gross weight up to 3,5 t. BS 09/30179109 does not address unique E/E systems in special purpose vehicles such as vehicles designed for drivers with disabilities. Systems developed prior to the publication date of BS 09/30179109 are exempted from the scope.BS 09/30179109 DC addresses possible hazards caused by malfunctioning behaviour of E/E safety-related systems including interaction of these systems. It does not address hazards as electric shock, fire, smoke, heat, radiation, toxicity, flammability, reactivity, corrosion, release of energy, and similar hazards unless directly caused by malfunctioning behaviour of E/E safety-related systems.BS 09/30179109 DC does not address the nominal performance of E/E systems, even if dedicated functional performance standards exist for these systems (for example active and passive safety systems, brake systems, ACC).BS 09/30179109 DC specifies the requirements for supporting processes. These include interfaces within distributed developments, overall management of safety requirements, configuration management, change management, verification, documentation, qualification of software tools, qualification of software components, qualification of hardware components, and proven in use argument.Cross References:ISO 10007:2003ISO 16949ISO 26262-1ISO 26262-2ISO 26262-3ISO 26262-4ISO 26262-5ISO 26262-6ISO 26262-7ISO 26262-9IEC 61508ISO 16750IEEE Std 830:1998ISO 15504All current amendments available at time of purchase are included with the purchase of this document.