ISO 199:2023-滚动轴承推力轴承产品几何量技术规范（GPS）和公差值-国家数字标准馆

现行 ISO 199:2023

到馆阅读

收藏跟踪

购买正版

Rolling bearings — Thrust bearings — Geometrical product specifications (GPS) and tolerance values 滚动轴承推力轴承产品几何量技术规范（GPS）和公差值

发布日期： 2023-08-16

本文件规定了尺寸特性、与标称值的偏差限制和公差值，以定义推力滚动轴承的界面（倒角除外）。标称边界尺寸在ISO？104[1].
本文件不适用于某些推力轴承（如推力滚针轴承）或特定应用领域（如特殊推力精密轴承）。此类轴承的公差在相关国际标准中给出。
倒角尺寸限制在ISO？582[3].

This document specifies dimensional characteristics, deviation limits from nominal values, and tolerance values to define the interface (except chamfers) of thrust rolling bearings. Nominal boundary dimensions are defined in ISO？104[1].
This document is not applicable to certain thrust bearings (e.g. thrust needle roller bearings) or for particular fields of application (e.g. special thrust precision bearings). Tolerances for such bearings are given in the relevant International Standards.
Chamfer dimension limits are given in ISO？582[3].

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 21.100.20轴承 - 滚动轴承

关联关系

研制信息

归口单位： ISO/TC 4/SC 4

相似标准/计划/法规

ABMA/ISO 199-2014

Rolling Bearings - Thrust Bearings - Geometrical product specification (GPS) and tolerance values
滚动轴承.推力轴承.几何产品规范（GPS）和公差值

GB/T 307.4-2017

滚动轴承推力轴承产品几何技术规范（GPS）和公差值
Rolling bearings—Thrust bearings—Geometrical product specifications (GPS) and tolerance values

Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
滚动轴承径向轴承产品几何量技术规范（GPS）和公差值

GB/T 307.1-2017

滚动轴承向心轴承产品几何技术规范（GPS）和公差值
Rolling bearings—Radial bearings—Geometrical product specifications (GPS) and tolerance values

Rolling bearings — Thrust needle roller and cage assemblies, thrust washers — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
滚动轴承 - 推力滚针和保持架组件止推垫圈 - 边界尺寸几何产品规格（GPS）和公差值

BS ISO 3031-2021

Rolling bearings. Thrust needle roller and cage assemblies, thrust washers. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
滚动轴承止推滚针和保持架组件、止推垫圈外形尺寸、产品几何规格（GPS）和公差值

GOST 28707-1990

Подшипники качения. Кольца упорные фасонные. Технические условия
滚动轴承独立的推力轴环规格

Rolling bearings — Radial bearings, retaining slots — Dimensions, geometrical product specifications (GPS) and tolerance values
滚动轴承.径向轴承固定槽.尺寸几何产品规范（GPS）和公差值

Rolling bearings — Insert bearings and eccentric locking collars — Geometrical product specifications (GPS) and tolerance values
滚动轴承镶块轴承和偏心锁环产品几何技术条件（GPS）及公差值

BS ISO 20515-2021

Rolling bearings. Radial bearings, retaining slots. Dimensions, geometrical product specifications (GPS) and tolerance values
滚动轴承径向轴承固定槽尺寸、几何产品规范（GPS）和公差值

BS ISO 9628-2019

Rolling bearings. Insert bearings and eccentric locking collars. Geometrical product specifications (GPS) and tolerance values
滚动轴承插入轴承和偏心锁环产品几何规格（GPS）和公差值

Rolling bearings — Radial bearings with locating snap ring — Dimensions, geometrical product specifications (GPS) and tolerance values
滚动轴承 - 带定位卡环的径向轴承 - 尺寸和公差

BS ISO 464-2015

Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
滚动轴承带定位卡环的径向轴承尺寸、几何产品规范（GPS）和公差值

JIS B 1509-2020

Rolling bearings -- Radial bearings with locating snap ring -- Dimensions, geometrical product specifications (GPS) and tolerance values
滚动轴承带定位卡环的径向轴承尺寸、几何产品规范（GPS）和公差值

Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
滚动轴承.带机加工环的滚针轴承.外形尺寸、几何产品规范（GPS）和公差值

Rolling bearings — Needle roller bearing track rollers — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
滚动轴承 - 滚针轴承滚轮 - 边界尺寸几何产品规格（GPS）和公差值

BS ISO 7063-2018

Rolling bearings. Needle roller bearing track rollers. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
滚动轴承滚针轴承履带滚柱外形尺寸、产品几何规格（GPS）和公差值

滚动轴承机制套圈滚针轴承外形尺寸、产品几何技术规范（GPS）和公差值
Rolling bearings—Needle roller bearings with machined rings—Boundary dimensions, geometrical product specifications (GPS) and tolerance values

滚动轴承滚轮滚针轴承外形尺寸、产品几何技术规范（GPS）和公差值
Rolling bearings—Needle roller bearing track rollers—Boundary dimensions, geometrical product specifications (GPS) and tolerance values

滚动轴承向心轴承止动槽和止动环尺寸、产品几何技术规范（GPS）和公差值
Rolling bearings－Snap ring grooves and snap rings for radial bearings－Dimensions，geometrical product specifications (GPS) and tolerance values

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统