BS EN 10106:2015规定了冷轧无取向电工钢带和薄板的标称尺寸 厚度分别为0.35毫米、0.50毫米、0.65毫米和1.00毫米。特别是，它规定了一般性原则 要求、磁性、几何特性和公差、技术要求 特性以及检查程序。本欧洲标准适用于在完全退火条件下供应的材料 磁路的构造。它不适用于半加工材料。这些磁性材料符合IEC 60404-1:2000，C.2.3.2.1。交叉引用:EN 10021EN 10027-1EN 10027-2EN 10204EN 10251EN 10280EN 10342EN 60404-2EN 60404-2IEC 60404-13IEC 60404-13EN ISO 7799ISO 7799IEC 60050-121IEC 60050-221EN ISO 2178ISO 2178IEC 60404-1:2000ASTM A 34/A 34M-01购买本文件时，包括所有当前可用的修订版。

BS EN 10106:2015 specifies cold-rolled non-oriented electrical steel strip and sheet in nominal thicknesses of 0,35 mm, 0,50 mm, 0,65 mm and 1,00 mm. In particular, it specifies general requirements, the magnetic properties, geometric characteristics and tolerances, technological characteristics as well as the inspection procedure.This European Standard applies to materials supplied in the fully annealed condition intended for the construction of magnetic circuits. It does not apply to semi-processed material.These magnetic materials correspond to IEC 60404-1:2000, C.2.3.2.1.Cross References:EN 10021EN 10027-1EN 10027-2EN 10204EN 10251EN 10280EN 10342EN 60404-2IEC 60404-2EN 60404-13IEC 60404-13EN ISO 7799ISO 7799IEC 60050-121IEC 60050-221EN ISO 2178ISO 2178IEC 60404-1:2000ASTM A 34/A 34M-01All current amendments available at time of purchase are included with the purchase of this document.