BS EN 62150-3:2015:已经发现一些光收发器和插座容易受到光纤的影响 当侧向力作用于配对电缆连接器组件时，电缆产生的应力， 导致传输光功率的变化。IEC 62150本部分的目的 定义物理应力测试，以确保此类光学连接（电缆和插座） 可以在规范范围内继续运行。本标准规定了光学设备的测试要求和程序 光学端口机械扰动引起的耦合功率变化的灵敏度 这是设备的一部分。本标准适用于带有光学插座接口的有源设备。本标准描述了与单模连接器一起使用的收发器的测试 有2.5毫米或1.25毫米的套圈。交叉引用:IEC 61753EN 61753IEC 61753-021-6EN 61753-021-6IEC 61754EN 61754IEC 61300EN 61300IEC 61754-4EN 61754-4IEC 61754-20EN 61754-20IEEE 802.3LC产品朗讯科技640- 252-056:2005Telcordia GR-253Telcordia GR-326Telcordia GR-1435购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS EN 62150-3:2015: It has been found that some optical transceivers and receptacles are susceptible to fibre optic cable induced stress when side forces are applied to the mated cable-connector assembly, resulting in variations in the transmitted optical power. The purpose of this part of IEC 62150 is to define physical stress tests to ensure that such optical connections (cable and receptacle) can continue to function within specifications.This standard specifies the test requirements and procedures for qualifying optical devices for sensitivity to coupled power variations induced by mechanical disturbance at the optical ports of the device.This standard applies to active devices with optical receptacle interfaces.This standard describes the testing of transceivers for use with single-mode connectors having either 2,5 mm or 1,25 mm ferrules.Cross References:IEC 61753EN 61753IEC 61753-021-6EN 61753-021-6IEC 61754EN 61754IEC 61300EN 61300IEC 61754-4EN 61754-4IEC 61754-20EN 61754-20IEEE 802.3LC Product Lucent Technologies 640-252-056:2005Telcordia GR-253Telcordia GR-326Telcordia GR-1435All current amendments available at time of purchase are included with the purchase of this document.