ISO 13263:2010-无压地下排水和排污用热塑性塑料管道系统——热塑性塑料配件——冲击强度试验方法 -国家数字标准馆

现行 ISO 13263:2010

到馆阅读

收藏跟踪

购买正版

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for impact strength 无压地下排水和排污用热塑性塑料管道系统——热塑性塑料配件——冲击强度试验方法

发布日期： 2010-04-15

ISO 13263:2010规定了通过将配件放置在刚性表面来测试其抗冲击性的方法。对于带有密封固定部件（如密封固定帽或密封圈）的配件，该方法包括在测试结果导致固定元件出现扰动时，评估配件的水密性。
它适用于由热塑性材料制成的配件，用于埋地和地上应用。

ISO 13263:2010 specifies a method for testing the impact resistance of fittings by dropping them on to a rigid surface. For a fitting with seal-retaining components, such as seal-retaining caps or rings, the method includes assessment of the watertightness of the fittings when the fixing elements show disturbance as a result of the test.
It is applicable to fittings made from thermoplastics materials intended to be used for buried and above-ground applications.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 93.030土木工程 - 外部污水排放系统、 23.040.45管道部件和管道 - 塑料配件、 23.040.20管道部件和管道 - 塑料管、 91.140.80建筑物中的设施 - 排水系统

关联关系

研制信息

归口单位： ISO/TC 138/SC 1

相似标准/计划/法规

BS EN ISO 13263-2017

Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for impact strength
无压地下排水和下水道用热塑性塑料管道系统热塑性塑料配件冲击强度试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics spirally-formed structured-wall pipes — Determination of the tensile strength of a seam
无压地下排水和排污用热塑性塑料管道系统——热塑性螺旋成型结构壁管——接缝抗拉强度的测定

BS EN ISO 13262-2017

Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam
无压地下排水和下水道用热塑性塑料管道系统热塑性塑料螺旋形结构壁管接缝抗拉强度的测定

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness
无压地下排水和排污用热塑性管道系统.检查室和人孔用热塑塑料竖井或立管.环刚度的测定

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance
无压地下排水和排污用热塑性管道系统.热塑性检查室和人孔底座.抗屈曲试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for mechanical strength or flexibility of fabricated fittings
无压地下排水和排污用热塑性塑料管道系统——热塑性塑料配件——装配配件机械强度或柔性的试验方法

DIN EN ISO 13263

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
无压地下排水和下水道用热塑性塑料管道系统.热塑性塑料配件.冲击强度试验方法（ISO 13263-2010）

BS EN ISO 13264-2017

Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings
无压地下排水和下水道用热塑性塑料管道系统热塑性塑料配件装配配件机械强度或柔性的试验方法

BS 09/30198124 DC

BS ISO 13263. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for impact strength
BS ISO 13263 无压地下排水和下水道用热塑性塑料管道系统热塑性塑料配件冲击强度试验方法

BS 05/30132762 DC

prEN 15229. Plastics piping systems. Piping systems for non-pressure underground drainage and sewerage. Performance requirements for thermoplastics manholes and inspection chambers
普伦15229 塑料管道系统无压地下排水和污水管道系统热塑性人孔和检查室的性能要求

Plastics piping systems for non-pressure underground drainage and sewerage — Polypropylene (PP)
无压地下排水和排污用塑料管道系统——聚丙烯（PP）

Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE)
无压地下排水和排污用塑料管道系统——聚乙烯（PE）

BS ISO 13260-2010

Thermoplastics piping systems for non-pressure underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading
无压地下排水和下水道用热塑性塑料管道系统耐组合温度循环和外部负载的试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading
无压地下排水和排污用热塑性塑料管道系统——耐组合温度循环和外部负载的试验方法

DIN EN ISO 13262

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
无压地下排水和污水用热塑性塑料管道系统.热塑性螺旋成型结构壁管.接缝抗拉强度的测定（ISO 13262-2010）

BS 09/30198121 DC

BS ISO 13262. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam
BS ISO 13262 无压地下排水和下水道用热塑性塑料管道系统热塑性塑料螺旋形结构壁管接缝抗拉强度的测定

BS EN 12666-1-2005+A1-2011

Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE)-Specifications for pipes, fittings and the system
无压地下排水和排污用塑料管道系统聚乙烯（PE）管道、配件和系统规范

BS EN ISO 11296-2-2018

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks-Lining with continuous pipes
地下无压排水和污水管网改造用塑料管道系统

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of resistance against surface and traffic loading
无压地下排水和排污用热塑性管道系统.检查室和人孔用热塑塑料竖井或立管.抗表面和交通荷载的测定

DIN EN ISO 13264

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
无压地下排水和下水道用热塑性塑料管道系统.热塑性配件.装配配件的机械强度或柔性试验方法（ISO 13264-2010）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统