现行

ASTM D3826-18

Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
使用拉伸试验测定可降解聚乙烯和聚丙烯的降解终点的标准实践

2018-11-01

现行

BS ISO 21475-2019

Plastics. Methods of exposure to determine the wavelength dependent degradation using spectrally dispersed radiation
塑料 使用光谱分散辐射测定波长相关降解的暴露方法

2019-05-28

现行

ISO 21475-2019

Plastics — Methods of exposure to determine the wavelength dependent degradation using spectrally dispersed radiation
塑料.用光谱分散辐射测定波长相关降解的曝光方法

2019-05-23

现行

ASD-STAN prEN 6063

Fibre reinforced plastics - Test method - Determination of material degradation due to chemical products
纤维增强塑料.试验方法.化学制品引起的材料降解的测定

1995-12-15

现行

AS 3706.12-2001

Geotextiles - Methods of test, Method 12: Determination of durability - Resistance to degradation by hydrocarbons or chemical reagents
土工织物.试验方法 方法12:耐久性测定.耐碳氢化合物或化学试剂降解性

2001-06-29

现行

AS 3706.11-2012

Geotextiles - Methods of test, Method 11: Determination of durability - Resistance to degradation by light, heat and moisture
土工织物.试验方法 方法11:耐久性测定.耐光、热和潮湿降解性

2012-04-30

现行

BS EN 16980-1-2021

Photocatalysis. Continuous flow test methods-Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
光催化 连续流动试验方法

2021-09-27

现行

ASTM D8528-24

Standard Test Method for Determination of Fluoride and Glycol Degradation Products in Engine Coolants by Ion Chromatography
用离子色谱法测定发动机冷却剂中氟化物和乙二醇降解产物的标准试验方法

2024-01-01

现行

ASD-STAN prEN 6030

Fibre reinforced plastics - Test methods - Determination of the mechanical degradation due to chemical paint strippers
纤维增强塑料.试验方法.化学脱漆剂引起的机械降解的测定

1995-12-15

现行

AS 3558.5-1999

Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 5: Determination of degradation by ultraviolet light
塑料和复合材料卫生管道固定装置的试验方法 方法5:紫外线降解的测定

1999-10-05

现行

BS EN 17181-2019

Lubricants. Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution. Test method based on CO2-production
润滑剂 测定水溶液中全配方润滑剂的好氧生物降解 基于CO2产生量的试验方法

2019-03-05

现行

ASTM D7475-20

Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions
加速生物反应器填埋条件下塑料材料有氧降解和厌氧生物降解的标准测试方法

2020-02-01

现行

DIN EN 17181

Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO<(Index)2>-production
润滑剂.水溶液中全配方润滑剂需氧生物降解的测定.基于CO<（指数）2>的试验方法.生产

2019-05-01

现行

BS ISO 23832-2021

Plastics. Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
塑料 实验室条件下暴露于海洋环境基质中的塑料材料降解率和崩解度测定的试验方法

2021-06-16

现行

ISO 23832-2021

Plastics — Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
塑料.在实验室条件下暴露于海洋环境基质中的塑料材料降解率和崩解度测定的试验方法

2021-06-15

现行

GB/T 43289-2023

塑料 实验室条件下测定暴露于海洋环境基质中塑料材料分解率和崩解程度的试验方法
Plastics—Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions

2023-11-27

现行

ASTM E2871-21

Standard Test Method for Determining Disinfectant Efficacy Against Biofilm Grown in the CDC Biofilm Reactor Using the Single Tube Method
用单管法测定CDC生物膜反应器中生物膜消毒剂效力的标准试验方法

2021-11-01

现行

ASTM D4567-19

Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
通过连续流动法使用氮吸附法对催化剂和催化剂载体的比表面积单点测定的标准测试方法

2019-07-01

现行

ASTM E2787-21

Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
使用加压流体萃取法测定土壤中硫二甘醇的标准测试方法 随后采用单反应监测液相色谱/串联质谱（LC/MS/MS）

2021-05-01