序言这是CSA B365《固体燃料燃烧装置和设备安装规范》的第八版。它取代了2010年、2001年、1991年、1987年、1984年、1982年和1980年出版的之前版本。本版本中的重大变化包括更新参考出版物，以及对穿墙通道、烟道管、炮尾管、顶针和炉灶间隙测量的修订要求。范围1。1本规范规定了室内或室外安装的固体燃料燃烧器具和设备的安装、改造和维护要求。 1.2在本规范中，固体燃料燃烧设备包括a）熔炉；b） 锅炉；c） 炉灶；d） 范围；e） 空间加热器；f） 工厂制造的壁炉；g）热水器。1.3在本规范中，术语“固体燃料”包括a）灯芯木；b） 木屑；c） 锯末；d） 泥炭原木；e） 木材和其他生物质颗粒；f） 谷粒玉米；g）煤炭。1.4本规范不适用于a）焚烧炉；b） 现场建造的壁炉；c） 工艺设备；或d）便携式设备。1.5在本规范中，“应”用于表示要求，即用户为遵守本标准而有义务满足的规定； “应该”用于表示建议或建议但不需要的建议；“may”用于表示一个选项或在本规范范围内允许的选项。注释随附条款不包括要求或替代要求；随附条款的注释的目的是将解释性或信息性材料与文本分开。表和图的注释被视为表或图的一部分，可以作为要求编写。附件被指定为规范性（强制性）或信息性（非强制性）- 必须）定义其应用程序。1.6国际单位制给出的数值为本规范中的记录单位。括号中给出的值仅供参考和比较。

PrefaceThis is the eighth edition of CSA B365, Installation code for solid-fuel-burning appliances and equipment. It supersedes the previous editions, published in 2010, 2001, 1991, 1987, 1984, 1982, and 1980. Significant changes in this edition include updated reference publications and revised requirements for wall pass-throughs, flue pipes, breech pipes, thimbles, and cookstove clearance measurements.Scope1.1 This Code specifies requirements for the installation, alteration, and maintenance of solid-fuel-burning appliances and equipment installed indoors or outdoors. 1.2 In this Code solid-fuel-burning appliances include a) furnaces; b) boilers; c) stoves; d) ranges; e) space heaters; f) factory-built fireplaces; and g) water heaters. 1.3 In this Code, the term "solid fuel" includes a) cordwood; b) wood chips; c) sawdust; d) peat logs; e) wood and other biomass pellets; f) kernel corn; and g) coal. 1.4 This Code does not apply to a) incinerators; b) site-built fireplaces; c) process equipment; or d) portable appliances. 1.5 In this Code, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the Code. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. 1.6 The values given in SI units are the units of record for the purposes of this Code. The values given in parentheses are for information and comparison only.