ISO 11148-1:2011规定了用于安装，紧固或拆卸断裂铆钉和非断裂铆钉，螺栓等的手持式非电动工具（以下称为“非螺纹机械紧固件的组装电动工具”）的安全要求。插头和紧固件从工件的一侧到金属，塑料和其他材料。用于非螺纹机械紧固件的组合电动工具可以由压缩空气，液压流体或内燃机提供动力，并且由一个操作者使用并由操作者的手或手支撑，有或没有悬架，例如，平衡器 ISO 11148-1:2011适用于断裂紧固件，铆钉或插头工具，断裂锁定工具，芯轴加固铆接工具和铆螺母固定器。 ISO 11148-1:2011不适用于手持式电动工具的特殊要求和修改，以将其安装在固定装置中。 ISO 11148-1:2011涉及到非螺纹机械紧固件的组装电动工具相关的所有重大危险，危险情况或危险事件，如果按预期使用且在制造商可合理预见的误用条件下使用，除外在潜在爆炸性气氛中使用电动工具

ISO 11148-1:2011 specifies safety requirements for hand-held non-electric power tools (hereinafter "assembly power tools for non-threaded mechanical fasteners") intended for installation, tightening or removal of both breakstem and non-breakstem rivets, bolts, plugs and fasteners from one side of a workpiece into metals, plastics and other materials. The assembly power tools for non-threaded mechanical fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. ISO 11148-1:2011 is applicable to breakstem fastener, rivet or plug tools, breakstem lockbolt tools, mandrel loaded riveting tools and rivet nut setters. ISO 11148-1:2011 is not applicable to special requirements and modifications of hand-held power tools for the purpose of mounting them in a fixture. ISO 11148-1:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to assembly power tools for non-threaded mechanical fasteners when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of power tools in potentially explosive atmospheres.