1.1 本规范涵盖0.375英寸铝1350拉丝。（9.52毫米）至1.000英寸。直径（25.40 mm），回火如所示 表1 ，用于绘制导线（解释性 注1 和 注释2 ). 1.2 密度和电阻率的SI值应视为标准。对于所有其他属性，英寸-磅值应视为标准值，国际单位制可以是近似值。 注1: 1975年之前，铝1350被指定为EC铝。 注2: 铝和回火名称符合ANSI H35.1。根据惯例，铝1350对应于统一编号系统A91350 E527 . 1.3 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification covers aluminum 1350 drawing stock 0.375 in. (9.52 mm) to 1.000 in. (25.40 mm) in diameter, in the tempers shown in Table 1 , for drawing into wire for electrical conductors (Explanatory Note 1 and Note 2 ). 1.2 The SI values of density and resistivity are to be regarded as the standard. For all other properties the inch-pound values are to be regarded as standard and the SI units may be approximate. Note 1: Prior to 1975, aluminum 1350 was designated as EC aluminum. Note 2: The aluminum and temper designations conform to ANSI H35.1. Aluminum 1350 corresponds to unified numbering system A91350 in accordance with Practice E527 . 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.