Railway applications. Track. Concrete sleepers and bearers with under sleeper pads
铁路应用 轨道带枕下垫的混凝土轨枕和支座
发布日期:
2016-06-30
BS EN 16730:2016适用于带枕下垫的混凝土轨枕或支撑架(USP)
与道碴轨道中使用的混凝土进行物理粘结,并定义试验程序及其评估
标准本标准提供了以下方面的详细信息:轨枕下垫板的试验方法、试验安排和评估标准;混凝土轨枕和枕下垫承木的试验方法、试验安排和评估标准;买方和供应商提供的数据;设计批准试验一般流程的定义;常规测试的定义。本标准规定了设计批准试验、常规试验和试验的具体试验程序
关于测定含或不含混凝土的枕下垫板的相关性能
枕木和承木:疲劳试验;对安装有USP的混凝土轨枕或支撑架进行堆叠储存能力测试;拔出试验;恶劣环境条件试验。本标准还规定了测试适用性的程序,并提供了以下信息:
质量监控是质量保证程序的一部分。然而,本标准不包含
与枕下垫板性能有关的要求。这是政府的责任
买方应定义这些要求。交叉引用:EN 206EN 1542EN 10027EN 13230-1:2016EN 13230-2:2016EN 13230-
3:2016EN 13230-4:2016EN 13230-5EN 13450EN ISO 527ISO 527EN ISO 7500-1ISO 7500-1EN ISO 9513:2012ISO 9513:2012EN ISO 22768ISO 2768ISO 37EN 13674EN ISO 9000EN ISO 10846-1ISO 10846-1EN ISO 10846-2EN ISO 10846-5ISO 10846-5ISO 10846-5购买本文件时提供的所有现行修订版均包含在购买本中。
BS EN 16730:2016 is applicable to concrete sleepers or bearers with Under Sleeper Pads (USP)
physically bonded to concrete used in ballast track and define the test procedures and their evaluation
criteria. This standard provides particular information in the following areas:test methods, test arrangements and evaluation criteria of Under Sleeper Pads;test methods, test arrangements and evaluation criteria of concrete sleepers and bearers withUnder Sleeper Pads;data supplied by the purchaser and by the supplier;definition of general process of design approval tests;definition of routine tests.This standard defines the specific test procedures for design approval tests, routine tests and tests
concerning the determination of relevant properties of Under Sleeper Pad with or without concrete
sleepers and bearers:fatigue tests;tests of capability for stacked stocking of concrete sleepers or bearers fitted with USP;pull-out test;severe environmental condition test.This standard also sets out procedures for testing fitness for purpose and provides information on
quality monitoring as part of quality assurance procedures. This standard does not, however, contain
requirements pertaining to the properties of Under Sleeper Pads. It is the responsibility of the
purchaser to define these requirements.Cross References:EN 206EN 1542EN 10027EN 13230-1:2016EN 13230-2:2016EN 13230-3:2016EN 13230-4:2016EN 13230-5EN 13450EN ISO 527ISO 527EN ISO 7500-1ISO 7500-1EN ISO 9513:2012ISO 9513:2012EN ISO 22768ISO 2768ISO 37EN 13674EN ISO 9000ISO 9000EN ISO 10846-1ISO 10846-1EN ISO 10846-2ISO 10846-2EN ISO 10846-5ISO 10846-5All current amendments available at time of purchase are included with the purchase of this document.