BS EN IEC 62153-4-15:2021-金属电缆和其他无源元件试验方法-国家数字标准馆

现行 BS EN IEC 62153-4-15:2021

到馆提醒

收藏跟踪

购买正版

Metallic cables and other passive components test methods-Electromagnetic compatibility (EMC). Test method for measuring transfer impedance and screening attenuation. or coupling attenuation with triaxial cell 金属电缆和其他无源元件试验方法

发布日期： 2021-09-21

IEC 62153的本部分规定了用三轴电池测量连接器、电缆组件和组件（例如模拟和数字传输系统的附件，以及通信网络和布线设备）的传输阻抗、屏蔽衰减或耦合衰减的程序。购买本文件时可获得的所有当前修订均包含在购买本文件中。

This part of IEC 62153 specifies the procedures for measuring with triaxial cell the transfer impedance, screening attenuation or the coupling attenuation of connectors, cable assemblies and components, for example accessories for analogue and digital transmission systems, and equipment for communication networks and cabling.All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS IEC 62153-4-17-2018

Metallic cables and other passive components. Test methods-Electromagnetic compatibility (EMC). Reduction Factor
金属电缆和其他无源元件测试方法

IEC 62153-4-17-2018

Metallic cables and other passive components - Test methods – Part 4-17: Electromagnetic compatibility (EMC) - Reduction Factor
金属电缆和其他无源元件试验方法第4-17部分:电磁兼容性（EMC）折减系数

BS IEC 62153-4-6-2017

Metallic cables and other passive components test methods-Electromagnetic compatibility (EMC). Surface transfer impedance. Line injection method
金属电缆和其他无源元件试验方法

IEC 62153-4-8-2018 RLV

Metallic cables and other passive components - Test methods - Part 4-8: Electromagnetic compatibility (EMC) - Capacitive coupling admittance
金属电缆和其他无源元件.试验方法.第4-8部分:电磁兼容性（EMC）.电容耦合导纳

IEC 62153-4-8-2018

Metallic cables and other passive components - Test methods - Part 4-8: Electromagnetic compatibility (EMC) - Capacitive coupling admittance
金属电缆和其他无源元件.试验方法.第4-8部分:电磁兼容性（EMC）.电容耦合导纳

IEC 62153-4-6-2017 RLV

Metallic cables and other passive components test methods - Part 4-6: Electromagnetic compatibility (EMC) - Surface transfer impedance - line injection method
金属电缆和其他无源元件试验方法第4-6部分:电磁兼容性表面转移阻抗线注入法

IEC 62153-4-6-2017

Metallic cables and other passive components test methods - Part 4-6: Electromagnetic compatibility (EMC) - Surface transfer impedance - line injection method
金属电缆和其他无源元件测试方法 - 第4-6部分:电磁兼容性（EMC） - 表面传输阻抗 - 线路注入法

IEC 62153-4-15-2021 RLV

Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with triaxial cell
金属电缆和其他无源元件试验方法第4-15部分:电磁兼容性（EMC）测量传输阻抗和屏蔽衰减或三轴单元耦合衰减的试验方法

IEC 62153-4-15-2021

Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with triaxial cell
金属电缆和其他无源元件试验方法第4-15部分:电磁兼容性（EMC）用三轴电池测量传输阻抗和屏蔽衰减或耦合衰减的试验方法

IEC 62153-4-15-2021+AMD1-2024 CSV

Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) related test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell
金属电缆和其他无源元件试验方法.第4-15部分:用三轴电池测量传输阻抗和屏蔽衰减或耦合衰减的电磁兼容性（EMC）相关试验方法

IEC 62153-4-15-2021/AMD1-2024

Amendment 1 - Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) related test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell
修改件1——金属电缆和其他无源元件试验方法——第4-15部分:用三轴电池测量传输阻抗和屏蔽衰减或耦合衰减的电磁兼容性（EMC）相关试验方法

BS EN IEC 62153-4-16-2021

Metallic cables and other passive components test methods-Electromagnetic compatibility (EMC). Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up
金属电缆和其他无源元件试验方法

IEC 62153-4-16-2021

Metallic cables and other passive components test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up
金属电缆和其他无源元件试验方法.第4-16部分:电磁兼容性（EMC）.使用三轴装置将频率范围扩展到传输阻抗的较高频率和屏蔽衰减测量的较低频率

BS EN IEC 62153-4-7-2021

Metallic cables and other passive components test methods-Electromagnetic compatibility (EMC). Test method for measuring of transfer impedance Z_T and screening attenuation a_S or coupling attenuation a_C of connectors and assemblies. Triaxial tube in tube method
金属电缆和其他无源元件试验方法

IEC 62153-4-7-2021 RLV

Metallic cables and other passive components test methods - Part 4-7: Electromagnetic compatibility (EMC) -Test method for measuring of transfer impedance Z_T and screening attenuation a_S or coupling attenuation a_C of connectors and assemblies - Triaxial tube in tube method
金属电缆和其他无源元件试验方法第4-7部分:电磁兼容性（EMC）测量连接器和组件的传输阻抗Z_T和屏蔽衰减a_S或耦合衰减a_C的试验方法三轴管中管法

IEC 62153-4-7-2021

Metallic cables and other passive components test methods - Part 4-7: Electromagnetic compatibility (EMC) -Test method for measuring of transfer impedance Z_T and screening attenuation a_S or coupling attenuation a_C of connectors and assemblies - Triaxial tube in tube method
金属电缆和其他无源元件试验方法.第4-7部分:电磁兼容性（EMC）.测量连接器和组件的传输阻抗Z_T和屏蔽衰减a_S或耦合衰减a_C的试验方法.三轴管中管法

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统