标准20°压力角型齿轮铣刀齿廓放样说明。标准组8个刀具，特殊组15个刀具（1到8个，增加½个尺寸）。还包括14½°压力角切割器。齿轮齿厚的减少，当需要铣齿轮与生成的齿轮啮合时，需要减少齿厚、心轴和键槽尺寸、刀具标记、订购说明、公制尺寸。交叉引用:BS 436BS 2007BS 2062BS 2519

Instructions for setting out of tooth profiles of milling cutters for gears of standard 20° pressure angle type. Standard group of 8 cutters, special group of 15 cutters (1 to 8, increasing by ½ sizes). 14½° pressure angle cutters are also covered. Reductions in gear tooth thickness, necessary when milled gears are required to mesh with generated gears, arbor and keyway sizes, marking of cutters, ordering instructions, metric sizes.Cross References:BS 436BS 2007BS 2062BS 2519