本技术规范规定了使用标准测量容器测定固体回收燃料的堆积密度的方法。该方法适用于标称顶部尺寸最大为100 mm的所有固体回收燃料。 注1:限制为最大100 mm的原因是测量容器的实际最大体积，因此是容器孔径的大小。颗粒尺寸不应超过该值的1/3。 注2:由于振动，冲击，压力，生物降解，干燥和润湿等多种影响，固体回收燃料的堆积密度可能会发生变化。因此，测量的体积密度可能在运输，储存或转运期间偏离实践条件

This Technical Specification specifies a method for the determination of bulk density of solid recovered fuels using a standard measuring container. This method is applicable to all solid recovered fuels with a nominal top size of maximal 100 mm. NOTE 1 The reason for the limitation to maximal 100 mm is the practical maximum volume of a measurement container and thus dimensions of the aperture of the container. Particle dimension should not exceed 1/3 of this value. NOTE 2 Bulk density of solid recovered fuels is subject to variation due to several impacts such as vibration, shock, pressure, biodegradation, drying and wetting. Measured bulk density can therefore deviate from practice conditions during transportation, storage or transhipment.