Conical Shaft Ends with External Thread; Dimensions
带外螺纹的锥形轴端；尺寸

1970-01-01

Концы валов конические с конусностью 1:10. Основные размеры. Допускаемые крутящие моменты
1:10锥形轴端 基础尺寸 允许的扭矩

Резьбовая часть арматуры для соединений трубопроводов по внутреннему конусу. Конструкция и размеры
内锥管接头的螺纹端部 施工和尺寸

Скобы двусторонние для контроля внутреннего диаметра шлицевых валов с прямобочным профилем при центрировании по d. Конструкция и размеры
双头卡扣式测量仪 用于在通过d定心时检查具有直边轮廓的花键轴的内径 设计和尺寸

Aerospace series. Rod-end with bearing EN 4265 in corrosion resisting steel, internal threaded shank. Dimensions and loads, Inch series
航空航天系列 杆端带有耐腐蚀钢制轴承EN 4265 内螺纹杆 尺寸和载荷 英制系列

2020-11-03

Aerospace series - Rod-ends, with bearing per EN4265 in corrosion resisting steel, internal threaded shank - Dimensions and loads - Inch series
航空航天系列.内螺纹杆耐腐蚀钢制轴承符合EN4265的杆端.尺寸和载荷.英制系列

2007-10-31

Aerospace series. Rod end, adjustable, with self-aligning double row ball bearing and threaded shank, in corrosion resisting steel, reduced internal radial clearance. Dimensions and loads
航空航天系列 杆端 可调 带自对准双列滚珠轴承和螺纹杆 采用耐腐蚀钢 内部径向间隙减小 尺寸和荷载

2021-03-16

Aerospace series - Rod-end with bearing EN 4265 in corrosion resisting steel, internal threaded shank - Dimensions and loads, Inch series; German and English version EN 6057:2020
航空航天系列.内螺纹杆耐腐蚀钢制带轴承EN 4265的杆端.尺寸和载荷 英制系列；德语和英语版本EN 6057:2020

2021-07-01

Aerospace series. Rod end, adjustable, with self-aligning double row ball bearing, in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy. Dimensions and loads
航空航天系列 杆端 可调 带自对准双列滚珠轴承 采用耐腐蚀钢 内部径向间隙减小 螺杆采用钛合金 尺寸和荷载

2021-03-18

Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing. Dimensions, design, test methods and requirements for external and internal hex port plugs
流体动力和一般用途的连接 端口和螺柱端部采用ISO 261公制螺纹和O形密封圈 外部和内部六角端口插头的尺寸、设计、试验方法和要求

2006-06-30

Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Dimensions, design, test methods and requirements for external hex and internal hex port plugs
一般用途和流体动力的连接 端口和螺柱端部采用ISO 261螺纹 采用弹性体或金属对金属密封

2016-12-31

Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing-Dimensions, design, test methods and requirements for external hex and internal hex port plugs
流体动力和一般用途的连接 带有ISO 261公制螺纹和O形密封圈的端口和螺柱端

2017-10-05

Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
用于流体动力和一般用途的连接 - ISO 261公制螺纹和O形密封圈的端口和螺柱端 - 第4部分:外部六角和内六角螺栓插头的尺寸 设计 测试方法和要求

2017-08-09

Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
一般用途和流体动力的连接 - 具有ISO 261螺纹的端口和螺柱端头 具有弹性或金属对金属密封 - 第4部分:外部六角和内六角螺栓插头的尺寸 设计 测试方法和要求

2016-11-24