EN 14117:2004-用于混凝土结构保护和修理的产品系统 - 试验方法 - 测定水泥注射产品的流出时间-国家数字标准馆

现行 EN 14117:2004

到馆阅读

收藏跟踪

购买正版

Products systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products 用于混凝土结构保护和修理的产品系统 - 试验方法 - 测定水泥注射产品的流出时间

发布日期： 2004-09-15

实施日期： 2004-09-15

本文档描述了基于测量标准体积的产品流过标准锥体（沼泽锥体）所需的时间来确定水泥注射产品的流出时间的测试方法。这次流出时间是测量水泥注射产品的粘度

This document describes a test method for determining the time of efflux of cementitious injection products, based on the measurement of the time taken for a standard volume of the product to flow through a standardised cone (Marsh cone). This time of efflux is a measure of the viscosity of cementitious injection products.

分类信息

发布单位或类别：国际组织-欧洲标准化委员会

CCS分类： Q10/29建材 - 建材产品

ICS分类： 91.100.10建筑材料 - 水泥、石膏、石灰、砂浆

关联关系

研制信息

归口单位： CEN/TC 104-

相似标准/计划/法规

UNE-EN 14117-2005

Products and systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products
混凝土结构保护和修理用产品和系统.试验方法.水泥基注射产品流出时间的测定

BS EN 14117-2004

Products and systems for the protection and repair of concrete structures. Test methods. Determination of time of efflux of cementitious injection products
混凝土结构保护和维修用产品和系统试验方法水泥基注射制品流出时间的测定

Products and systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products
混凝土结构保护和修复用产品和系统.试验方法.水泥基注射产品流出时间的测定；德文版EN 14117:2004

UNE-EN 13294-2002

Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time.
混凝土结构保护和修理用产品和系统.试验方法.硬化时间的测定

UNE-EN 1771-2005

Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability and splitting test
混凝土结构保护和修理用产品和系统.试验方法.可注射性和劈裂试验的测定

Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products
用于混凝土结构保护和修理的产品和系统 - 试验方法 - 修复产品压缩蠕变的测定

Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation
用于混凝土结构保护和修理的产品和系统 - 试验方法 - 耐碳酸化的测定

EN 14497-2004/AC-2006

Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability
用于混凝土结构保护和修理的产品和系统 - 试验方法 - 过滤稳定性的测定

Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability
用于混凝土结构保护和修理的产品和系统 - 试验方法 - 过滤稳定性的测定

Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability and splitting test
用于混凝土结构保护和修复的产品和系统 - 试验方法 - 可注射性和分裂试验的测定

EN 1771-2004/AC-2005

Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability and splitting test
用于混凝土结构保护和修复的产品和系统 - 试验方法 - 可注射性和分裂试验的测定

EN 12637-3-2003

Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers
用于混凝土结构保护和修理的产品和系统 - 试验方法 - 注射产品的相容性 - 第3部分:注射产品对弹性体的影响

Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles
用于混凝土结构保护和修理的产品和系统 - 试验方法 - 空气干燥和储水循环后注射产品的体积和重量变化

Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time
混凝土结构保护和修理用产品和系统.试验方法.硬化时间的测定；德文版EN 13294:2002

Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents
用于混凝土结构保护和修理的产品和系统 - 试验方法 - 用于表征结构粘合剂的钢 - 钢粘附力测定

EN 12618-1-2003

Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility
用于混凝土结构保护和修理的产品和系统 - 试验方法 - 第1部分:延展性有限的注射产品的粘合力和伸长率

UNE-EN 12618-3-2006

Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method
混凝土结构保护和修理用产品和系统.试验方法.第3部分:有或没有热循环的注射产品附着力的测定.斜剪法

EN 13894-1-2003

Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 1: During cure
用于混凝土结构保护和修理的产品和系统 - 试验方法 - 动态载荷下的疲劳测定 - 第1部分:固化期间

EN 13687-5-2002

Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 5: Resistance to temperature shock
用于混凝土结构保护和修理的产品和系统 - 试验方法 - 热相容性的测定 - 第5部分:耐温度冲击

UNE-EN 12618-2-2006

Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with our without thermal cycling - Adhesion by tensile bond strength
混凝土结构保护和修理用产品和系统.试验方法.第2部分:无热循环的注射产品附着力的测定.通过拉伸粘结强度测定附着力

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统