BS ISO 12619-6:2017规定了压缩气体自动阀的试验和要求 氢气（CGH2）和氢气/天然气混合燃料系统部件，用于 ISO 3833中定义的机动车类型。根据ISO 14687-1，它适用于使用压缩气态氢（CGH2）的车辆 或ISO 14687-2和按照ISO 15403-1使用天然气的氢气/天然气混合物，以及 ISO/TR 15403-2。不适用于以下情况:a）液化氢（LH2）燃料系统部件；b） 燃料容器；c） 固定式燃气发动机；d） 集装箱安装硬件；e） 电子燃料管理；f） 加油容器。注1:应认识到，本文中未具体涵盖的其他组件可通过以下方式进行检查: 符合本文件的标准，并根据适当的功能测试进行测试。注2:除非另有说明，否则本文件中提及的所有压力均应视为表压 明确规定。注3:本文件可能不适用于符合国际法规的燃料电池车辆。交叉引用:ISO 12619-1ISO 12619-2IEC 60079-10-1ISO 3833ISO 13686ISO 14687ISO 11114-2ISO 14687-1ISO 14687-2ISO 15403-1ISO/TR 15403-2ISO/TS 15869ISO/TR 15916购买本文件时提供的所有当前修订均包括在内。

BS ISO 12619-6:2017 specifies tests and requirements for the automatic valve, a compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system component intended for use on the types of motor vehicles defined in ISO 3833.It is applicable to vehicles using compressed gaseous hydrogen (CGH2) in accordance with ISO 14687-1 or ISO 14687-2 and hydrogen/natural gas blends using natural gas in accordance with ISO 15403-1 and ISO/TR 15403-2. It is not applicable to the following:a) liquefied hydrogen (LH2) fuel system components;b) fuel containers;c) stationary gas engines;d) container mounting hardware;e) electronic fuel management;f) refuelling receptacles.NOTE 1 It is recognized that miscellaneous components not specifically covered herein can be examined to meet the criteria of this document and tested according to the appropriate functional tests.NOTE 2 All references to pressure in this document are to be considered gauge pressures unless otherwise specified.NOTE 3 This document may not apply to fuel cell vehicles in compliance with international regulations.Cross References:ISO 12619-1ISO 12619-2IEC 60079-10-1ISO 3833ISO 13686ISO 14687ISO 11114-2ISO 14687-1ISO 14687-2ISO 15403-1ISO/TR 15403-2ISO/TS 15869ISO/TR 15916All current amendments available at time of purchase are included with the purchase of this document.