气体灭火系统施工及验收规范
Code for installation and acceptance of gas extinguishing systems

2007-01-24

炼铁机械设备安装规范(附条文说明)
Code for acceptance of mechanical equipment installation of ironmaking system

2011-07-26

氨制冷系统安装工程施工及验收规范(附条文说明)
Code for installation and acceptance specification of ammonia refrigeration system

2011-07-07

消防通信指挥系统施工及验收规范
Code for installation and acceptance of fire communication and command system

2007-02-27

固定消防炮灭火系统施工与验收规范
Code for installation and acceptance of fixed fire monitor extinguishing systems

2009-05-13

梯级水电厂集中监控系统安装及验收规程
Installation and acceptance code for centralized supervision and control system of cascade hydropower plants

2018-04-03

冶金机械液压、润滑和气动设备工程安装验收规范
Code for installation acceptance of metal mechanical hydromatic,lubricating and air-driven system equipment

2006-09-06

家用太阳能热水系统应用设计、安装及验收技术规范
Technical code for application design, installation and acceptance of domestic solar water heating systems

2017-10-14

邮政通信设备安装工程验收规范 第十册 信盒处理系统
Code for acceptance of postal equipment installation project volume 10 the letter tray conveyance system

2003-10-18

线型光纤感温火灾探测报警系统设计及施工规范(附条文说明)
Code for design,installation & acceptance of fire alarm system with line type optical fiber heat detector

2013-10-17

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation
气体燃料供应用塑料管道系统.熔融连接和机械连接的未增塑聚酰胺（PA-U）管道系统.第6部分:设计、操作和安装实施规程

2023-10-18

Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar). Polyamide (PA)-Code of practice for design, handling and installation
最大工作压力不超过2 MPa（20 bar）的气体燃料供应用塑料管道系统 聚酰胺（PA） 设计、搬运和安装实施规程

2010-05-31

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 6: Code of practice for design, handling and installation (ISO 16486-6:2012)
气体燃料供应用塑料管道系统.带熔合连接和机械连接的未增塑聚酰胺（PA-U）管道系统.第6部分:设计、搬运和安装实施规程（ISO 16486-6-2012）

2015-07-01