EN 1264系列给出了安装在建筑物、住宅和非住宅（如办公、公共、商业和工业建筑）中的表面嵌入式加热和冷却系统的指南，并侧重于为热舒适目的安装的系统。 EN 1264系列给出了嵌入待加热或待冷却房间外壳表面的水基加热和冷却系统的指南。它还规定了使用其他加热介质代替水，视情况而定。 EN 1264系列通过计算和测试技术规范和认证的加热热输出，规定了标准化的产品特性。 关于这些系统的设计、构造和操作，见EN 1264-3和EN 1264-4中A、B、C、D、H、I和J型。对于E、F和G型，见EN ISO 11855系列。 EN 1264系列中规定的系统与建筑物外壳表面的结构基座相连，直接安装或用固定支架安装。EN 1264系列没有规定安装在吊顶内的吊顶系统，该吊顶系统和建筑结构之间设计有开放的空气间隙，允许热诱导空气循环。这些系统的热输出可根据EN 14037系列和EN 14240确定。 EN 1264-3规定了EN 1264-2和EN 1264-5结果在实际工程中的应用。 对于加热系统，在指定表面温度时要考虑生理限制。对于地板供暖系统，根据EN 1264-2确定的特性曲线和极限曲线，通过设计实现限制。 对于冷却系统，仅考虑露点限制。在主导实践中，这意味着生理限制也包括在内。

The EN 1264 series gives guidelines for surface embedded heating and cooling systems installed in buildings, residential and non-residential (e.g. office, public, commercial and industrial buildings) and focuses on systems installed for the purpose of thermal comfort. The EN 1264 series gives guidelines for water based heating and cooling systems embedded into the enclosure surfaces of the room to be heated or to be cooled. It also specifies the use of other heating media instead of water, as appropriate. The EN 1264 series specifies standardized product characteristics by calculation and testing the thermal output of heating for technical specifications and certification. For the design, construction and operation of these systems, see EN 1264-3 and EN 1264-4 for the types A, B, C, D, H, I and J. For the types E, F and G, see the EN ISO 11855 series. The systems specified in the EN 1264 series are adjoined to the structural base of the enclosure surfaces of the building, mounted directly or with fixing supports. The EN 1264 series does not specify ceiling systems mounted in a suspended ceiling with a designed open air gap between the system and the building structure which allows the thermally induced circulation of the air. The thermal output of these systems can be determined according to EN 14037 series and EN 14240. EN 1264-3 specifies the use in practical engineering of the results coming from EN 1264-2 and EN 1264-5. For heating systems, physiological limitations are taken into account when specifying the surface temperatures. In the case of floor heating systems the limitations are realized by a design based on the characteristic curves and limit curves determined in accordance with EN 1264-2. For cooling systems, only a limitation with respect to the dew point is taken into account. In predominating practice, this means that physiological limitations are included as well.