BS EN 13915:2017规定了由以下材料制成的预制板的特性和性能: 符合EN 520要求的石膏板饰面和蜂窝纸板芯 用作轻型隔墙、衬里和外壳，用于建筑中的一般用途。本标准涵盖以下特征:对火的反应、水蒸气渗透性、弯曲性 强度（断裂载荷）和热阻根据相应的 欧洲测试方法。本标准仅适用于安装的预制板，以避免核心暴露。 以下性能特征与使用预制板组装的系统有关 由石膏板饰面和蜂窝纸板芯制成:抗剪强度、耐火性、， 直接空气隔声、吸声和透气性应根据 相应的欧洲测试方法。如果需要，应在组装好的系统上进行测试 模拟最终使用条件。本文件还涵盖了对使用和维护具有重要意义的其他技术特征 建筑行业对产品的验收。 它提供产品性能稳定性的评估和验证。交叉引用:EN 13963:2014EN ISO 717-1（ISO 717-1:2013）ASISO 10456:2007 Ed 3EN 13501-1:2007+A1:2009EN ISO 12572（ISO 12572:2016）ASEN 12664:2001EN ISO 354（ISO 354:2003 AS）ISO 11925-2:2010 Ed 3EN ISO 10456（ISO 10456:2007）ASISO 9001（ISO 9001:2015）ASISO 7892:1988（R07）ISO 717-1:2013 ED3EN ISO 11925-2（ISO 11925-2:2010）ASISO 12572:2016EN 13501-2002EN+2019ENISO 10140-2（ISO 10140-2:2010）作为ISO 9001:2015，购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS EN 13915:2017 specifies the characteristics and performance of prefabricated panels made of gypsum plasterboard facings complying with EN 520 and a cellular paperboard core intended to be used as a lightweight partition, lining and encasement for general use in buildings.This standard covers the following characteristics: reaction to fire, water vapour permeability, flexural strength (breaking load) and thermal resistance to be measured according to the corresponding European test methods.This Standard covers only prefabricated panels installed so that the core is not exposed.The following performance characteristics are linked to systems assembled with prefabricated panels made of gypsum plasterboard facings and a cellular paperboard core: shear strength, fire resistance, direct airborne sound insulation, acoustic absorption and air permeability to be measured according to the corresponding European test methods. If required, tests should be done on assembled systems simulating the end use conditions.This document covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Building Industry.It provides the assessment and verification of constancy of performance of the products.Cross References:EN 13963:2014EN ISO 717-1 (ISO 717-1:2013) ASISO 10456:2007 Ed 3EN 13501-1:2007+A1:2009EN ISO 12572 (ISO 12572:2016) ASEN 12664:2001EN ISO 354 (ISO 354:2003 AS)ISO 11925-2:2010 Ed 3EN ISO 10456 (ISO 10456:2007) ASEN ISO 9001 (ISO 9001:2015) ASISO 7892:1988 (R07)ISO 717-1:2013 ED3EN ISO 11925-2 (ISO 11925-2:2010) ASISO 12572:2016EN 13501-2:2016EN 520:2004+A1:2009ISO 10140-2:2010EN ISO 10140-2 (ISO 10140-2:2010) AS ISO 9001:2015All current amendments available at time of purchase are included with the purchase of this document.