AS 1722.2-1992-惠特沃斯管螺纹第2部分:紧固管螺纹-国家数字标准馆

现行 AS 1722.2-1992

到馆阅读

收藏跟踪

购买正版

Pipe threads of Whitworth form, Part 2: Fastening pipe threads 惠特沃斯管螺纹第2部分:紧固管螺纹

发布日期： 1992-01-17

规定了螺纹形式、螺纹尺寸、公差、相关量规和测量规程，用于紧固标称孔径为4 mm至150 mm的管道的螺纹。包含用于紧固管螺纹的螺纹规限值和尺寸的修改表；设置通止螺丝卡规的插头；提供可调螺钉卡钳量规的使用；以及GO量规的磨损余量。

Specifies thread form, thread dimensions, tolerance, and associated gauges and gauging practices for fastening threads for pipes of nominal bore 4 mm to 150 mm. Incorporates modified tables for screw gauge limits and dimensions for fastening pipe threads; setting plugs for GO and NOT GO screw calliper gauges; provision for the use of adjustable screw calliper gauges; and wear allowance for GO gauges.

分类信息

发布单位或类别：澳大利亚-澳大利亚标准

关联关系

研制信息

相似标准/计划/法规

JB/T 8364.2-2010

60°圆锥管螺纹刀具第2部分：60°圆锥管螺纹丝锥
Tools for taper pipe threads with 60° thread angle-Part 2:Taps for taper pipe threads with 60° thread angle

JB/T 13583.2-2019

数控管螺纹车床第2部分：技术条件
CNC pipe thread lathes-Part 2:Specifications

GB/T 7306.2-2000

55°密封管螺纹第2部分:圆锥内螺纹与圆锥外螺纹
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 2:Taper internal and external threads

Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
螺纹上有压力密封接头的管螺纹.第2部分:锥形外螺纹和锥形内螺纹.尺寸公差和名称；德文版EN 10226-2:2005

UNE-EN 10226-2-2005

Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
螺纹上有压力密封接头的管螺纹.第2部分:锥形外螺纹和锥形内螺纹.尺寸公差和名称

KS B ISO 7-2(2018 Confirm)

나사 압력 조임 이음쇠용 관나사－제2부：한계 게이지를 이용한 검증
螺纹上有耐压接头的管螺纹第2部分:用极限量规检验

KS B ISO 7-2(2023 Confirm)

나사 압력 조임 이음쇠용 관나사－제2부：한계 게이지를 이용한 검증
螺纹上有压力密封接头的管螺纹第2部分:用极限量规检验

Pipe threads where pressure-tight joints are made on the threads — Part 2: Verification by means of limit gauges
在螺纹Spart 2上进行压力密封接头的管道螺纹:通过极限量规进行验证

Pipe threads where pressure-tight joints are not made on the threads — Part 2: Verification by means of limit gauges
未在螺纹Spart 2上进行压力密封接头的管螺纹:通过极限量规进行验证

AS ISO 7.2-2008

Pipe threads where pressure-tight joints are made on the threads, Part 2: Verification by means of limit gauges
螺纹上有压力密封接头的管螺纹第2部分:用极限量规进行验证

DIN EN ISO 228-2

Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
未在螺纹上进行压力密封连接的管螺纹第2部分:用极限量规进行验证；德文版EN ISO 228-2:2003

UNE-EN ISO 228-2-2003

Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
未在螺纹上进行压力密封连接的管螺纹第2部分:用极限量规进行验证

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统