EN 508的这一部分规定了对具有或不具有其他有机涂层的金属涂层钢板进行不连续铺设的自支撑屋顶，覆盖层，墙面包层，衬里，衬垫托盘和瓷砖产品的要求。用于绝缘和膜的板材也被覆盖。 本欧洲标准规定了产品的一般特性，定义，分类和标签，以及可以制造产品的材料的要求。制造商应由制造商使用，以确保其产品符合要求，或由采购商在出厂前确认产品是否符合要求。它规定了使其能够满足所有正常服务条件的产品的要求。 本欧洲标准适用于所有不连续铺设的自支撑外墙板，用于屋顶覆盖物，墙面包层，衬里和衬板，除了表面积小于1平方米的瓷砖，并通过冲压生产。这些异型板设计用于将风，雨和雪从建筑物中保持，并将任何合成的负载和不常见的维护负载转移到结构中。 这个欧洲标准没有

This part of EN 508 specifies requirements for self-supporting roofing, covering, wall cladding, lining, liner trays and tiles products for discontinuous laying made from metallic coated steel sheet with or without additional organic coatings. Sheets intended to be used with insulation and membranes are also covered. This European Standard establishes general characteristics, definitions, classifications and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply when purchased before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. This European Standard applies to all discontinuously laid self-supporting external profiled sheets for roofing covering, wall cladding, lining and liner trays with the exception of tiles with a surface area less than 1 m2 and produced by stamping. These profiled sheets are designed to keep wind, rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure. This European Standard does not cover products for structural purposes, i.e. it does cover products used in constructions of Class III (according to EN 1993-1-3), it does not cover products used in constructions of Classes I and II (according to EN 1993-1-3) intended to contribute to the global or partial stability of the building structure by providing racking resistance or resistance to permanent static loads (excluding self-weight of the metal sheet). No requirements for supporting construction, design of roof, cladding, lining, tile system and execution of connections and flashings are included.