IEC 60352-2:20 24适用于由以下材料制成的无焊压接连接: -适当设计的未绝缘或预绝缘压接筒，作为压接触点、端子或接头的一部分，以及 -横截面为0.05 mm2至10 mm2的绞合线或 -直径为0.25 mm至3.6 mm的实心线； 用于电气和电子设备。 除了测试程序之外，还包括来自工业经验的材料信息和数据，以在规定的环境条件下提供电气稳定的连接。 IEC 60352的这一部分不适用于同轴电缆的压接。 IEC 60352的这一部分确定了上述无焊压接连接在规定的机械、电气和大气条件下的适用性，并提供了一种在用于制造连接的工具具有不同设计或制造时比较测试结果的方法。

IEC 60352-2:2024 is applicable to solderless crimped connections made with:
- appropriately designed uninsulated or pre-insulated crimp barrels as parts of crimp contacts, terminal ends or splices, and
- stranded wires of 0,05 mm2 to 10 mm2 cross-section or
- solid wires of 0,25 mm to 3,6 mm diameter;
for use in electrical and electronic equipment.
Information on the materials and data from industrial experience is included in addition to the test procedures to provide electrically stable connections under prescribed environmental conditions.
This part of IEC 60352 is not applicable to crimping of coaxial cables.
This part of IEC 60352 determines the suitability of solderless crimped connections as described above, under specified mechanical, electrical and atmospheric conditions and provides a means of comparing test results when the tools used to make the connections are of different designs or manufacture.