ISO 8759-1:2018-农用轮式拖拉机 - 前置式设备 - 第1部分:动力输出:PTO周围的安全要求和间隙区域-国家数字标准馆

现行 ISO 8759-1:2018

到馆阅读

收藏跟踪

购买正版

Agricultural tractors — Front-mounted equipment — Part 1: Power take-off: Safety requirements and clearance zone around PTO 农用轮式拖拉机 - 前置式设备 - 第1部分:动力输出:PTO周围的安全要求和间隙区域

发布日期： 2018-11-15

本文件规定了农业拖拉机前置动力输出轴（PTO）的安全要求及其周围的间隙区域。
注1:ISO 8759-3中给出了前装式取力器的进一步规范。
它不适用于设计为在两个方向上运行的拖拉机，其中任何一端都可以被视为前部或后部。
注2:在这种情况下，ISO 500（所有零件）适用。

This document specifies safety requirements for, and clearance zones around, front-mounted power take-offs (PTO) on agricultural tractors.
NOTE 1 Further specifications for front-mounted power take-offs are given in ISO 8759-3.
It is not applicable to tractors which are designed to run in two directions, where either end can be considered to be the front or the rear.
NOTE 2 In this case, ISO 500 (all parts) apply.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 65.060.10农业机械、工具和设备 - 农业拖拉机和牵引车辆

关联关系

研制信息

归口单位： ISO/TC 23/SC 4

相似标准/计划/法规

GB/T 10916-2003

农业轮式拖拉机前置装置第1部分:动力输出轴和三点悬挂装置
Agricultural wheeled tractors--Front-mounted equipment--Part 1: Power take-off and three-point linkage

BS ISO 8759-3-2018

Agricultural tractors. Front-mounted equipment-Power take-off: General specifications and location
农业拖拉机前置设备

ASAE/ASABE AD8759-3-2018

Agricultural tractors - Front-mounted equipment - Part 3: Power take-off: General specifications and location
农业拖拉机.前置设备.第3部分:动力输出装置:一般规范和位置

ASAE/ASABE AD8759-3-2018(R2024)

Agricultural tractors - Front-mounted equipment - Part 3: Power take-off: General specifications and location
农业拖拉机.前置设备.第3部分:动力输出装置:一般规范和位置

ISO 8759-3-2018

Agricultural tractors — Front-mounted equipment — Part 3: Power take-off: General specifications and location
农用轮式拖拉机 - 前置式设备 - 第3部分:动力输出:一般规格和位置

ASAE/ASABE AD8759-1-2018

Agricultural tractors - Front-mounted equipment - Part 1: Power take-off: Safety requirements and clearance zone around PTO
农业拖拉机.前置设备.第1部分:动力输出:安全要求和PTO周围的间隙区

KS B ISO 8759-1

농업용 트랙터 — 전방 부착 작업기 —제1부: 동력취출장치: 안전 요건과 동력취출장치 주위의 안전 영역
农用轮式拖拉机 - 前置式设备 - 第1部分:动力输出:PTO周围的安全要求和间隙区域

ASAE/ASABE AD8759-1-2018(R2024)

Agricultural tractors - Front-mounted equipment - Part 1: Power take-off: Safety requirements and clearance zone around PTO
农业拖拉机.前置设备.第1部分:动力输出:安全要求和PTO周围的间隙区

Agricultural wheeled tractors - Front-mounted equipment - Part 1: Power take-off and three-point linkage (ISO 8759-1:1998)
农业机械和拖拉机前置设备第1部分:动力输出和三点悬挂机构

BS ISO 8759-1-2018

Agricultural tractors. Front-mounted equipment-Power take-off: Safety requirements and clearance zone around PTO
农业拖拉机前置设备

농업용 트랙터 후방 동력취출 장치 형식 1, 2, 3 제 제2부부: 협폭 트랙터트랙터, 주커버와 안전 영역
农业拖拉机.1、2和3型后置动力输出装置.第2部分:窄履带拖拉机.主护罩和间隙区的尺寸

KS B ISO 500-2(2017 Confirm)

농업용 트랙터-후방 동력취출장치 형식 1,2,3-2부:협폭 트랙터, 주커버와 안전 영역
农用拖拉机1、2和3型后置动力输出轴第2部分:窄履带拖拉机主护罩和间隙区尺寸

Agricultural tractors — Rear-mounted power take-off types 1, 2 and 3 — Part 2: Narrow-track tractors, dimensions for master shield and clearance zone
农业拖拉机——后置式动力输出类型1、2和3第2部分:窄履带拖拉机主护罩和间隙区尺寸

CAN/CSA M5000.3-07

Agricultural Tractors - Rear-Mounted Power Take-off Types 1,2, and 3 - Part 1: Main PTO Dimensions and Spline Dimensions, Location of PTO
农业拖拉机1、2和3型后置动力输出装置第1部分:主要PTO尺寸和花键尺寸、PTO位置

CAN/CSA M5000.1-07

Agricultural Tractors - Rear-Mounted Power Take-off Types 1,2, and 3 - Part 1: General Specifications, Safety Requirements, Dimensions for Master Shield and Clearance Zone
农业拖拉机1、2和3型后置动力输出装置第1部分:通用规范、安全要求、主护罩和间隙区尺寸

KS B ISO 500-3(2020 Confirm)

농업용 트랙터 — 후방 동력취출장치 형식 1, 2, 3, 4 — 제3부: 주 PTO 치수, 스플라인 치수, PTO 위치
农业拖拉机1、2、3、4型后置动力输出装置第3部分:主动力输出轴尺寸和花键尺寸动力输出轴位置

Agricultural tractors — Rear-mounted power take-off types 1, 2, 3 and 4 — Part 3: Main PTO dimensions and spline dimensions, location of PTO
农业拖拉机——后置动力输出类型1、2、3和4第3部分:主PTO尺寸和花键尺寸、PTO位置

KS B ISO 500-1(2020 Confirm)

농업용 트랙터 — 후방 동력취출장치 형식 1, 2, 3, 4 — 제1부: 주커버와 안전 영역에 대한 일반 제원, 안전요건, 치수
农业拖拉机1、2、3和4型后置动力输出轴第1部分:总规范、安全要求、主护罩和间隙区尺寸

GB/T 1592.1-2016

农业拖拉机后置动力输出轴 1、2、3和4型第1部分：通用要求、安全要求、防护罩尺寸和空隙范围
Agricultural tractors—Rear-mounted power take-off types 1, 2, 3 and 4—Part 1: General specifications，safety requirements，dimensions for master shield and clearance zone

Agricultural tractors — Rear-mounted power take-off types 1, 2, 3 and 4 — Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone
农业拖拉机——后置式动力输出类型1、2、3和4第1部分:一般规范、安全要求、主护罩和间隙区的尺寸

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统