BS EN 17151:2019-非饮用水无压地下输送和储存用塑料管道系统箱子长期抗压强度测定的试验方法-国家数字标准馆

现行 BS EN 17151:2019

到馆提醒

收藏跟踪

购买正版

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Test method for determination of long-term compression strength of boxes 非饮用水无压地下输送和储存用塑料管道系统箱子长期抗压强度测定的试验方法

发布日期： 2020-02-17

                本文件规定了确定混凝土长期抗压强度的试验方法
非压力地下运输用热塑性材料制成的箱子的规定期限
以及储存非饮用水。
本文件适用于在规定时间内保持线性行为的箱子。交叉引用:EN ISO 7500-1:2018EN ISO 3126EN 17150:2019BS EN 17150:2019ISO 9080ISO/TS 28037:2010EN ISO 306购买本文件时提供的所有当前修订版均包含在购买本文件中。

This document specifies a test method for determining the long-term compression strength for a
specified period on boxes made of thermoplastics materials for non-pressure underground conveyance
and storage of non-potable water.
The document is applicable for boxes which maintain their linear behaviour over the specified period.Cross References:EN ISO 7500-1:2018EN ISO 3126EN 17150:2019BS EN 17150:2019ISO 9080ISO/TS 28037:2010EN ISO 306All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of long-term compression strength of boxes
非饮用水的无压地下输送和储存用塑料管道系统.盒子长期抗压强度测定的试验方法

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of short-term compression strength of boxes
非饮用水的无压地下输送和储存用塑料管道系统.盒子短期抗压强度测定的试验方法

BS EN 17150-2019

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Test method for determination of short-term compression strength of boxes
非饮用水无压地下输送和储存用塑料管道系统箱子短期抗压强度测定的试验方法

Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE)
无压地下排水和排污用塑料管道系统——聚乙烯（PE）

Plastics piping systems for non-pressure underground drainage and sewerage — Polypropylene (PP)
无压地下排水和排污用塑料管道系统——聚丙烯（PP）

BS EN 12666-1-2005+A1-2011

Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE)-Specifications for pipes, fittings and the system
无压地下排水和排污用塑料管道系统聚乙烯（PE）管道、配件和系统规范

BS EN ISO 11296-2-2018

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks-Lining with continuous pipes
地下无压排水和污水管网改造用塑料管道系统

BS DD CEN/TS 1852-3-2003

Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP)-Guidance for installation
无压地下排水和排污用塑料管道系统聚丙烯（PP）安装指南

BS EN ISO 11296-3-2018

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks-Lining with close-fit pipes
地下无压排水和污水管网改造用塑料管道系统

BS EN ISO 11296-4-2018+A1-2021

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks-Lining with cured-in-place pipes
地下无压排水和污水管网改造用塑料管道系统

BS EN ISO 11296-7-2019

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks-Lining with spirally-wound pipes
地下无压排水和污水管网改造用塑料管道系统

BS EN 17152-1-2019

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Boxes used for infiltration, attenuation and storage systems-Specifications for storm water boxes made of PP and PVC-U
非饮用水无压地下输送和储存用塑料管道系统用于渗透、衰减和存储系统的盒子

UNE-EN 1852-1-2009

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
无压地下排水和污水用塑料管道系统.聚丙烯（PP）.第1部分:管道、配件和系统规范

UNE-EN 12666-1-2006

Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
无压地下排水和污水用塑料管道系统.聚乙烯（PE）.第1部分:管道、配件和系统规范

ISO 11296-2-2018

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 2: Lining with continuous pipes
塑料管道系统用于改造地下非压力排水和污水处理网络 - 第2部分:连续管道衬里

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General
地下无压排水和污水管网改造用塑料管道系统.第1部分:总则；德文版EN 13566-1:2002

BS PD CEN/TS 12666-2-2012

Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE)-Guidance for the assessment of conformity
无压地下排水和排污用塑料管道系统聚乙烯（PE）

BS PD CEN/TS 1852-2-2019

Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP)-Guidance for the assessment of conformity
无压地下排水和排污用塑料管道系统聚丙烯（PP）合格评定指南

UNE-EN 13566-1-2003

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General
地下无压排水和污水管网改造用塑料管道系统.第1部分:总则

ISO 11296-1-2018

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General
塑料管道系统用于改造地下非压力排水和污水处理网络 - 第1部分:总则

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统