BS EN 13914-1:2016/COR1规定了设计、准备和测试的要求和建议 以水泥、石灰或其他矿物粘合剂和/或其组合为基础的涂料的应用 基于水泥和聚合物改性粘合剂的外部效果图，符合EN 998-1或 现场制作的渲染；根据EN 15824，在所有常见类型的背景上使用有机粘合剂进行渲染。它包括在新旧背景和 现有工程的维护和维修。本文件给出了已建场地的使用指南， 工厂和半成品工厂制作的渲染。本文件不包括以下内容:液体挡水结构（例如涂层）的特殊抹灰的使用和应用，以及 熔覆系统的背景；混凝土结构修复；外保温复合系统（ETIS）的安装；用于密封抹灰接缝的密封剂的规范和使用； 使用外部使用的石膏基抹灰，但在某些国家可能允许使用； 石膏基产品在长期潮湿条件下会软化。使用此类 外部产品将取决于使用抹灰的气候条件和 当地的建筑传统。除了南欧一些干旱的国家 石膏基抹灰一般不建议外用，因此不适用 包含在本文件范围内。然而，它们的使用可能是允许和控制的 在当地。保护区内的历史遗迹或建筑物上可能受 国家法规；窗台和其他地方防水板的设计和安装。由于欧洲有多种多样的材料和做法，气候条件也各不相同，所以它很受欢迎 本标准的某些方面不可能进入足够的细节，以完全可供用户使用 每个国家的从业人员。补充但不改变任何基本欧洲标准的适当指导 每个国家编制的文件中都给出了建议。这一欧洲政策的各个方面 可能需要补充其基本建议的标准在其出现的地方进行了说明 通过引用本条款的脚注。交叉引用:EN 197-1EN 413-1EN 459-1EN 934-3EN 998-1:2010EN 1008EN 1996-2EN 10088-1EN 10346EN 12878EN 13055EN 13139EN 13496EN 13658-2EN 15824:2009EN ISO 1461ISO 16120-2ISO 16120-2EN 1015-18EN 1062EN 1504EN 1992-1-2EN 1993-1-1-2-2-1-2-1-2-1-1-2-1-2-1995-1-2-1-2-1-2-1-1996-1-1-1-1-2-1-2-2-2-2-1-2-1-1-1-2-2-1-1-1勘误表如下:

BS EN 13914-1:2016/COR1 specifies requirements and recommendations for the design, preparation and application ofrenders based on cement, lime or other mineral binders, and/or combinations thereof, masonry cement and polymer modified binder based external renderings, in accordance with EN 998-1 or site made renders;renders based on organic binders in accordance with EN 15824on all common types of backgrounds. It includes rendering on both new and old backgrounds and the maintenance and repair of existing work. This document gives guidance on the use of established site, factory and semi-finished factory made renders.This document does not cover the following:the use and application of special renders for liquid retaining structures, e.g. coatings, and for backgrounds to cladding systems;the structural repair of concrete;the installation of external thermal insulation composite systems (ETICS);the specification and use of sealants used to seal joints for use with rendering;the use of gypsum based renders used externally, but their use may be permitted in some countries; Gypsum based products soften when subject to prolonged moist conditions. The use of such products externally will depend upon the climatic conditions where the render will be used and on the local building traditions. With the exception of some drier countries in southern Europe gypsum based renders are generally not recommended for external use and are therefore not included within the scope of this document. However, their use may be permitted and controlled locally.renders on historical monuments or buildings in protected areas which may be regulated by national codes;the design and installation of flashings at windowsills and elsewhere.Because of the many and varied materials and practices and different climatic conditions in Europe it is not possible for certain aspects of the standard to enter into sufficient detail to be fully usable to practitioners in each country. Appropriate guidance to complement, but not alter any basic European recommendations is given in documentation prepared by each country. Aspects of this European Standard whose basic recommendations may need to be complemented are indicated where they occur by a footnote referencing this clause.Cross References:EN 197-1EN 413-1EN 459-1EN 934-3EN 998-1:2010EN 1008EN 1996-2EN 10088-1EN 10346EN 12878EN 13055EN 13139EN 13496EN 13658-2EN 15824:2009EN ISO 1461ISO 1461EN ISO 16120-2ISO 16120-2EN 1015-18EN 1062EN 1504EN 1992-1-2EN 1993-1-2EN 1994-1-2EN 1995-1-2EN 1996-1-2EN 12811-1Incorporates the following:Corrigendum