1.1本规程涵盖了分离和定性鉴定聚对苯二甲酸乙二醇酯（PET）薄片中聚氯乙烯（PVC）污染的四个程序。 笔记 1-虽然不是作为定量方法提出的，但本实践中提出的程序可用于提供定量结果，由用户自行决定。用户负责验证定量结果的再现性。来自独立来源的数据表明，基于454g的原始样品重量，PVC检测水平为200ppm（w/w）。 1.2 程序A 基于PVC和PET在暴露于紫外线（UV）时的不同荧光。 1.3 程序B 是基于PVC在235℃的空气中加热时的炭化的烘箱试验吗 ° C 1.4 程序C和D 染色测试是基于PVC和PET的差异染色。 笔记 2-其他聚合物（例如PETG）也会吸收污渍或光亮剂。此类干扰将导致PVC作为污染物的假阳性识别。 1.5 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 具体危险见第8节。 笔记 3-没有已知的ISO等效于本规程。 ====意义和用途====== 再生PET薄片中即使存在低浓度的PVC，也可能导致加工过程中的设备腐蚀问题。PVC污染程度也可能决定在二次产品中使用回收聚合物的市场。本规程中提出的程序用于识别回收PET薄片中的PVC污染浓度，如果需要，还可以估计其浓度。

1.1 This practice covers four procedures for separation and qualitative identification of poly(vinyl chloride) (PVC) contamination in poly(ethylene terephthalate) (PET) flakes. Note 1—Although not presented as a quantitative method, procedures presented in this practice may be used to provide quantitative results at the discretion of the user. The user assumes the responsibility to verify the reproducibility of quantitative results. Data from an independent source suggest a PVC detection level of 200 ppm (w/w) based on an original sample weight of 454 g. 1.2 Procedure A is based on different fluorescence of PVC and PET when these polymers are exposed to ultraviolet (UV) light. 1.3 Procedure B is an oven test based upon the charring of PVC when it is heated in air at 235 ° C. 1.4 Procedures C and D are dye tests based on differential staining of PVC and PET. Note 2—Other polymers (for example, PETG) also absorb the stain or brightener. Such interferences will result in false positive identification of PVC as the contaminant. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards see Section 8. Note 3—There is no known ISO equivalent to this practice. ====== Significance And Use ====== Presence of even low concentrations of PVC in recycled PET flakes may result in equipment corrosion problems during processing. The level of PVC contamination may also dictate the market for use of the recycled polymer in secondary products. Procedures presented in this practice are used to identify and, if desired, estimate the concentration of PVC contamination in recycled PET flakes.