ISO 4392-2:2002-液压流体动力——motorsPart 2特性的测定:可起动性 -国家数字标准馆

现行 ISO 4392-2:2002

到馆阅读

收藏跟踪

购买正版

Hydraulic fluid power — Determination of characteristics of motors — Part 2: Startability 液压流体动力——motorsPart 2特性的测定:可起动性

发布日期： 2002-03-07

ISO 4392的本部分规定了两种测定旋转液压马达起动性的试验方法。它描述了两种可比较的测量方法，即恒定扭矩法和恒定压力法。由于这两种方法得到的结果是等效的，因此不优先考虑这两种方法。

This part of ISO 4392 specifies two test methods for determining the startability of rotary hydraulic motors. It describes two comparable methods of measurement, namely the constant torque method and the constant pressure method. Since the results obtained by these two methods are equivalent, no preference is given to either.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 23.100.10流体动力系统 - 泵和马达

关联关系

研制信息

归口单位： ISO/TC 131/SC 8

相似标准/计划/法规

BS ISO 4392-2-2002

Hydraulic fluid power. Determination of characteristics of motors-Startability
液压传动电动机特性的测定

BS ISO 4392-1-2002

Hydraulic fluid power. Determination of characteristics of motors-At constant low speed and constant pressure
液压传动电动机特性的测定

Determination of hydraulic fluid power motor characteristics-Method at constant flow and at constant torque
液压流体动力马达特性的测定恒定流量和恒定扭矩下的方法

ISO 4392-3-1993

Hydraulic fluid power — Determination of characteristics of motors — Part 3: At constant flow and at constant torque
液压流体动力——motorsPart 3特性的测定:恒定流量和恒定扭矩下

BS ISO 15086-1-2001

Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systems-Hydraulic fluid power. Determination of the fluid borne noise characteristics of components and systems. Introduction
液压传动部件和系统流体传播噪声特性的测定

GB/T 20421.1-2006

液压马达特性的测定第1部分：在恒低速和恒压力下
Hydraulic fluid power―Determination of characteristics of motors―Part 1: At constant low speed and at constant pressure

ISO 4392-1-2002

Hydraulic fluid power — Determination of characteristics of motors — Part 1: At constant low speed and constant pressure
液压流体动力——恒定低速和恒定压力下motorsPart 1特性的测定

GB/T 34887-2017

液压传动马达噪声测定规范
Hydraulic fluid power—Test code for the determination of noise level of hydraulic motors

GB/T 20421.2-2006

液压马达特性的测定第2部分：起动性
Hydraulic fluid power―Determination of chracteristics of motors―Part 2: Startability

液压阀压差-流量特性的测定
Hydraulic fluid power-Valves - Determination of pressure differential/flow characteristics

NFPA(Fluid) T3.5.15M-1986(R2018)

Hydraulic Fluid Power -- Valves -- Method for Determining the Internal Leakage Characteristics
液压传动阀门内部泄漏特性的测定方法

BS ISO 8426-2008

Hydraulic fluid power. Positive displacement pumps and motors. Determination of derived capacity
液压传动容积式泵和马达导出容量的确定

Hydraulic fluid power — Positive displacement pumps and motors — Determination of derived capacity
液压流体动力——容积式泵和电机——导出容量的确定

液压泵和马达空载排量测定方法
Hydraulic fluid power-positive displacement pumps and motors - Determination of derived capacity

BS ISO 17559-2003

Hydraulic fluid power. Electrically controlled hydraulic pumps. Test methods to determine performance characteristics
液压传动电控液压泵确定性能特性的试验方法

Hydraulic fluid power — Electrically controlled hydraulic pumps — Test methods to determine performance characteristics
液压流体动力——电控液压泵——确定性能特性的试验方法

GB/T 23253-2009

液压传动电控液压泵性能试验方法
Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics

ISO 15086-3-2022

Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 3: Measurement of hydraulic impedance
液压传动.部件和系统流体噪声特性的测定.第3部分:液压阻抗的测量

GB/T 44050.3-2024

液压传动油液噪声特性测定第3部分：液压阻抗的测量
Hydraulic fluid power—Determination of fluid-borne noise characteristics of components and systems—Part 3: Measurement of hydraulic impedance

BS ISO 4411-2019

Hydraulic fluid power. Valves. Determination of differential pressure/flow rate characteristics
液压传动阀门压差/流量特性的测定

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统