1.1 本试验方法包括测定固化条件下树脂基导电粘合剂的体积电阻率。试验在粘结试样中制备的薄粘合层上进行。本试验方法用于在室温或高温下固化的导电粘合剂。 1.2 以国际单位制或其他单位表示的数值应单独视为标准值。螺纹的SI当量如图所示。 1.3 本标准无意解决与其使用相关的安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 5.1 准确测量导电粘合剂的体积电阻率非常重要，尤其是在电子封装技术中的应用方面。该方法测量作为粘接组件一部分的薄膜中使用的导电粘合剂的电阻。这并不意味着测量结果适用于具有不同金属的不同配置。 该方法可用于验收测试和筛选材料。

1.1 This test method covers the determination of the volume resistivity of resin-based conductive adhesives in the cured condition. The test is made on a thin adhesive layer as prepared in a bonded specimen. This test method is used for conductive adhesives that are cured either at room temperature or at elevated temperatures. 1.2 The values stated in either SI or other units shall be regarded separately as standard. SI equivalents to screw threads are shown in the figures. 1.3 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 Accurate measurement of the volume resistivity of conductive adhesives is important, particularly with respect to applications in electronic packaging techniques. This method measures the resistance of conductive adhesives used in thin films as part of a bonded assembly. This does not imply that the measured results are applicable to different configurations with different metals. This method may be used for acceptance testing and for screening materials.