BS L 117:1975-铝镁硅铜铬合金管规范（溶液处理和人工老化:未进行液压试验）（厚度不超过10mm）（Mg 1.0 Si 0.6 Cu 0.28 Cr 0.2）-国家数字标准馆

现行 BS L 117:1975

到馆阅读

收藏跟踪

购买正版

Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2) 铝镁硅铜铬合金管规范（溶液处理和人工老化:未进行液压试验）（厚度不超过10mm）（Mg 1.0 Si 0.6 Cu 0.28 Cr 0.2）

发布日期： 1975-05-30

交叉引用:BS 350BS 3763L 100L 118

Cross References:BS 350BS 3763L 100L 118

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

Specification for copper-zinc-aluminium-nickel-silicon alloy tube
铜锌铝镍硅合金管规范

GOST 13637.1-1993

Галлий. Атомно-эмиссионный метод определения алюминия, висмута, железа, кремния, магния, марганца, меди, никеля, олова, свинца, хрома и цинка
镓用于测定铝铁铋硅镁锰铜镍锡铅铬和锌的原子发射方法

BS 09/30181199 DC

BS 3B 27. Specification for copper-zinc-aluminium- nickel-silicon alloy tube
BS 3B 27 铜锌铝镍硅合金管规范

Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
铝镁硅铜铬合金管规范（溶液处理和人工老化:液压试验）（厚度不超过10mm）（Mg 1.0 Si 0.6 Cu 0.28 Cr 0.2）

GOST 13637.3-1993

Галлий. Химико-атомно-эмиссионный метод определения алюминия, висмута, индия, кадмия, кобальта, кремния, магния, марганца, меди, никеля, свинца, серебра, хрома, цинка и железа
镓用于测定铝铋钴硅镁锰铜镍铅银铬锌和铁的化学原子发射方法

Specification for ingots and castings of aluminium-silicon-copper-magnesium alloy (solution treated and precipitation treated) (Si 5, Cu 1.2, Mg 0.5)
铝硅铜镁合金锭和铸件规范（固溶处理和沉淀处理）（Si 5 Cu 1.2 Mg 0.5）

Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝-铜-镁-硅-锰合金管规范（室温固溶处理和时效）（壁厚不超过10 mm）（Cu 4.4 Mg 0.5 Si 0.7 Mn 0.8）

Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
镀铝铝铜镁硅锰合金（固溶处理和人工时效）精密公差薄板和带材规范（Cu 4.4 Mg 0.5 Si 0.8 Mn 0.8）

Specification. Hand and die forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
规格铝-锌-镁-铜-铬合金手锻件和模锻件（固溶处理并人工时效至过时效状态）（Zn 5.6 Mg 2.5 Cu 1.6 Cr 0.22）

GB/T 24197-2009

锰矿石铁、硅、铝、钙、钡、镁、钾、铜、镍、锌、磷、钴、铬、钒、砷、铅和钛含量的测定电感耦合等离子体原子发射光谱法
Manganese ores - Determination of iron，silicon，aluminium，calcium，barium，magnesium，potassium，copper，nickel，zinc，phosphorus，cobalt，chromium，vanadium，arsenic，lead，titanium and vanadium - Inductively coupled plasma atomic emission spectrometry

Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
铝涂层铝-铜-镁-硅-锰合金（室温固溶处理和时效）的精密薄板和带材规范（Cu 4.4 Mg 0.5 Si 0.8 Mn 0.8）

Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝-铜-镁-硅-锰合金（固溶处理和沉淀处理）的锻坯和锻件规范（Cu 4.4 Mg 0.5 Si 0.7 Mn 0.8）

Specification for plate of aluminium-copper-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝铜镁硅锰合金板材规范（固溶处理、控制拉伸和沉淀处理）（Cu 4.4、Mg 0.5、Si 0.7、Mn 0.8）

Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8)
铝-铜-硅-镁合金（固溶处理和沉淀处理）的锻坯、棒材、挤压型材和锻件规范（Cu 1.5、Si 1、Mg 0.8）

Specification for ingots and castings of aluminium-silicon-copper-iron-nickel-magnesium alloy (precipitation treated) (Si 2.5, Cu 1.2, Fe 1, Ni 1, Mg 0.1)
铝硅铜铁镍镁合金（沉淀处理）锭和铸件规范（Si 2.5 Cu 1.2 Fe 1 Ni 1 Mg 0.1）

Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated, cold worked for flattening and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
铝涂层铝-铜-镁-硅-锰合金薄板和带材规范（固溶处理、冷加工以压扁并在室温下时效）（Cu 4.4、Mg 0.5、Si 0.8、Mn 0.8）

Specification. Cold compressed hand forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
规格铝-锌-镁-铜-铬合金冷压缩手工锻件（固溶处理并人工时效至过时效状态）（Zn 5.6 Mg 2.5 Cu 1.6 Cr 0.22）

Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
铝-铜-镁-硅-锰合金（固溶处理和人工时效）精密薄板和带材规范（Cu 4.4 Mg 0.5 Si 0.8 Mn 0.8）

Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝-铜-镁-硅-锰合金（室温固溶处理和时效）的锻坯和锻件规范（Cu 4.4 Mg 0.5 Si 0.7 Mn 0.8）

GB/T 33909-2017

纯铂化学分析方法钯、铑、铱、钌、金、银、铝、铋、铬、铜、铁、镍、铅、镁、锰、锡、锌、硅量的测定电感耦合等离子体质谱法
Methods for chemical analysis of platinum—Determination of palladium，rhodium，iridium，ruthenium，gold，silver，aluminium，bismuth，chromium，copper，iron，nickel，lead，magnesium，manganese，tin，zinc，silicon content—Inductively coupled plasma mass spectrometry

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统