BS EN 16842-8:2021-动力工业卡车能见度测试方法与验证-国家数字标准馆

现行 BS EN 16842-8:2021

到馆阅读

收藏跟踪

购买正版

Powered industrial trucks. Visibility-Test methods and verification-Stand-on counterbalance trucks up to and including 10 000 kg capacity 动力工业卡车能见度测试方法与验证

发布日期： 2021-01-18

                本文件规定了备用设备360°可视性的要求和测试程序
根据ISO 5053-1，载重不超过10000 kg（含10000 kg）的平衡卡车
（以下简称卡车）无负载，且拟与
EN 16842-1。购买本文件时可获得的所有当前修订均包含在购买本文件中。

This document specifies the requirements and test procedures for 360° visibility of stand-on
counterbalance trucks with a capacity up to and including 10 000 kg in accordance with ISO 5053-1
(herein after referred to as trucks) without a load and it is intended to be used in conjunction with
EN 16842-1.All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS EN 16842-1-2018

Powered industrial trucks. Visibility. Test methods and verification-General requirements
动力工业卡车可见度测试方法和验证一般要求

Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements
动力工业卡车.可见度.试验方法和验证.第1部分:一般要求

BS EN 16842-10-2020

Powered industrial trucks. Visibility. Test methods and verification-Towing and Pushing tractors and Burden carrier
动力工业卡车可见度测试方法和验证

BS EN 16842-3-2018

Powered industrial trucks. Visibility. Test methods and verification-Reach trucks up to and including 10 000 kg capacity
动力工业卡车可见度测试方法和验证载重不超过10000 kg（含10000 kg）的大型卡车

BS EN 16842-4-2019

Powered industrial trucks. Visibility. Test methods and verification-Industrial variable reach trucks up to and including 10 000 kg capacity
动力工业卡车可见度测试方法和验证

BS EN 16842-5-2021

Powered industrial trucks. Visibility. Test methods and verification-Industrial variable-reach trucks greater than 10 000 kg capacity
动力工业卡车可见度测试方法和验证

BS EN 16842-9-2019

Powered industrial trucks. Visibility. Test methods and verification-Order-picking, lateral- and front-stacking trucks with elevating operator position
动力工业卡车可见度测试方法和验证

Powered industrial trucks - Visibility - Test methods and verification - Part 5: Industrial variable-reach trucks greater than 10000 kg capacity
机动工业卡车.可见度.试验方法和验证.第5部分:容量大于10000 kg的工业可变范围卡车；德文版EN 16842-5:2021

DIN EN 16842-10

Powered industrial trucks - Visibility - Test methods and verification - Part 10: Towing and Pushing tractors and Burden carrier
机动工业卡车.可见度.试验方法和验证.第10部分:牵引和推动拖拉机及装载机；德文版EN 16842-10:2020

Powered industrial trucks - Visibility - Test methods and verification - Part 8: Stand-on counterbalance trucks up to and including 10000 kg capacity
机动工业卡车.可见度.试验方法和验证.第8部分:10000 kg及以下的立式平衡卡车；德文版EN 16842-8:2021

Powered industrial trucks - Visibility - Test methods and verification - Part 4: Industrial variable reach trucks up to and including 10 000 kg capacity
动力工业卡车.可见度.试验方法和验证.第4部分:10000 kg及以下的工业可变范围卡车

BS ISO 13564-1-2012

Powered industrial trucks. Test methods for verification of visibility-Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
动力工业卡车可见度检验的试验方法

BS EN 16842-6-2018

Powered industrial trucks. Visibility. Test methods and verification-Sit-on counterbalance trucks and rough terrain masted trucks greater than 10 000 kg capacity
动力工业卡车可见度测试方法和验证坐在载重能力大于10000 kg的平衡重卡车和崎岖不平的地面桅杆卡车上

BS EN 16842-2-2018

Powered industrial trucks. Visibility. Test methods and verification-Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg capacity
动力工业卡车可见度测试方法和验证坐在平衡重卡车和不平地面桅杆卡车上容量不超过10000 kg

GB/T 32272.1-2015

机动工业车辆验证视野的试验方法第1部分：起重量不大于10t的坐驾式、站驾式车辆和伸缩臂式叉车
Powered industrial trucks—Test methods for verification of visibility—Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10t capacity

KS B ISO 13564-1(2020 Confirm)

산업용 동력트럭 — 시야성 확보를 위한 시험방법 — 제1부: 좌승식 및 입승식 트럭과 10 t 용량 이하의 가변 리치 트럭
动力工业卡车 - 验证可视性的测试方法 - 第1部分:直立和包含10吨容量的坐式和独立操作员卡车和可变牵引卡车

ISO 13564-1-2012

Powered industrial trucks — Test methods for verification of visibility — Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
动力工业卡车——可视性验证的试验方法第1部分:坐式和站式操作卡车和10t及以下的可变范围卡车

Powered industrial trucks - Visibility - Test methods and verification - Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg capacity
动力工业卡车.可见度.试验方法和验证.第2部分:10000 kg及以下的坐式平衡卡车和崎岖地形桅杆卡车

BS EN 16842-7-2018

Powered industrial trucks. Visibility. Test methods and verification-Variable-reach and masted container trucks handling freight containers of 6 m (20 ft) length and longer
动力工业卡车可见度测试方法和验证用于装卸6米（20英尺）长及更长货物集装箱的可变伸缩和桅杆式集装箱卡车

DIN EN ISO 13564-1-DRAFT

Draft Document - Powered industrial trucks - Visibility - Test methods and verification - Part 1: Sit-on and stand-on operator trucks up to and including 10 t capacity (ISO/DIS 13564-1:2006); German version prEN ISO 13564-1:2006
文件草案.动力工业卡车.可见度.试验方法和验证.第1部分:10t及以下的坐式和站式操作卡车（ISO/DIS 13564-1-2006）；德文版prEN ISO 13564-1:2006

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统