BS EN 804:1995-塑料管道系统压力管道溶剂胶结接头用注射成型承插接头耐短期内部静水压力的试验方法-国家数字标准馆

现行 BS EN 804:1995

到馆阅读

收藏跟踪

购买正版

Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure 塑料管道系统压力管道溶剂胶结接头用注射成型承插接头耐短期内部静水压力的试验方法

发布日期： 1995-07-15

购买本文件时可获得的所有当前修订均包含在购买本文件中。

All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

现行

UNE-EN 804-1995

PLASTICS PIPING SYSTEMS. INJECTION-MOULDED SOCKET FITTINGS FOR SOLVENT-CEMENTED JOINTS FOR PRESSURE PIPING. TEST METHOD FOR RESISTANCE TO A SHORT-TERM INTERNAL HYDROSTATIC PRESSURE.
塑料管道系统压力管道溶剂胶结接头用注射成型承插接头耐短期内部静水压力的试验方法

1995-09-18

现行

DIN EN 804

Injection-moulded plastics socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
塑料管道系统.压力管道用溶剂胶结接头用注射模制套筒配件.耐短期内部静水压力的试验方法；德文版EN 804:1994

1994-08-01

现行

GOST R ISO 580-2008

Трубопроводы из пластмасс. Детали соединительные литьевые из термопластов. Методы определения изменения внешнего вида после прогрева
塑料管道系统注塑热塑性塑料配件加热后配件外观变化的确定方法

现行

BS EN 12107-1998

Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
塑料管道系统注塑热塑性塑料配件、阀门和辅助设备管道部件注射成型用热塑性材料长期静水压强度的测定

1998-03-15

现行

UNE-EN 12107-1998

PLASTICS PIPING SYSTEMS. INJECTION-MOULDED THERMOPLASTICS FITTINGS, VALVES AND ANCILLARY EQUIPMENT. DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS FOR INJECTION MOULDING OF PIPING COMPONENTS.
塑料管道系统注塑热塑性塑料配件、阀门和辅助设备管道部件注射成型用热塑性材料长期静水压强度的测定

1998-05-07

现行

BS EN 802-1995

Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing
塑料管道系统压力管道系统用注射成型热塑性塑料配件用压碎法测定最大变形的试验方法

1995-07-15

现行

UNE-EN 802-1995

PLASTICS PIPING AND DUCTING SYSTEMS. INJECTION-MOULDED THERMOPLASTICS FITTINGS FOR PRESSURE PIPING SYSTEMS. TEST METHOD FOR MAXIMUN DEFORMATION BY CRUSHING.
塑料管道系统压力管道系统用注射成型热塑性塑料配件通过压碎实现最大变形的试验方法

1995-09-18

现行

ISO 580-2005

Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
塑料管道系统——注塑热塑性塑料配件——目视评估加热效果的方法

2005-03-07

现行

BS EN ISO 580-2005

Plastics piping and ducting systems. Injection-moulded thermoplastics fittings. Methods for visually assessing the effects of heating
塑料管道系统注塑热塑性塑料配件目视评估加热效果的方法

2005-11-05

现行

UNE-EN ISO 580-2005

Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005)
塑料管道和导管系统.注射成型热塑性塑料配件.加热效果的目视评估方法（ISO 580-2005）

Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust
塑料管道系统压力管道弹性密封环式接头用注射成型热塑性塑料配件无端推力的短期内压耐受性试验方法

1995-07-15

现行

UNE-EN 803-1995

PLASTICS PIPING SYSTEMS. INJECTION-MOULDED THERMOPLASTICS FITTINGS FOR ELASTIC SEALING RING TYPE JOINTS FOR PRESSURE PIPING. TEST METHOD FOR RESISTANCE TO A SHORT-TERM INTERNAL PRESSURE WITHOUT END THRUST.
塑料管道系统压力管道弹性密封环式接头用注射成型热塑性塑料配件无端推力的短期内压耐受性试验方法

1995-09-18