1.1 本规范 2. 制定了无缝红黄铜（铜合金UNS编号C23000）的要求 3. 标称管道尺寸的管道，包括常规管道和超强管道。在退火状态下（O61），管道适用于管道、锅炉给水管道和类似用途。在绘制的通用回火（H58）中，管道适用于建筑应用，如防护栏杆和楼梯扶手。 1.2 单位- 以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.3 以下危险警告仅适用于试验方法部分， 9.1.1 ，符合本规范。 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 警告- 许多监管机构已将汞指定为一种危险物质，可导致严重的医疗问题。汞或其蒸汽已被证明对健康有害，并对材料具有腐蚀性。处理汞和汞时要小心- 包含产品。有关更多信息，请参阅适用的产品安全数据表（SDS）。当地或国家法律禁止销售汞或含汞产品，或两者兼有。用户必须确定其所在地销售的合法性。（参见 9.2 .) 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification 2 establishes requirements for seamless red brass (Copper Alloy UNS No. C23000) 3 pipe in nominal pipe sizes, both regular and extra-strong. In the annealed temper (O61), the pipe is suitable for use in plumbing, boiler feed lines, and for similar purposes. In the drawn general purpose temper (H58), the pipe is suitable for architectural applications, such as guard railings and stair hand railings. 1.2 Units— The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following hazard caveat pertains only to the test method portion, 9.1.1 , of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 Warning— Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Use caution when handling mercury and mercury-containing products. See the applicable product Safety Data Sheet (SDS) for additional information. The potential exists that selling mercury or mercury-containing products, or both, is prohibited by local or national law. Users must determine legality of sales in their location. (See 9.2 .) 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.