1.1 本规范涵盖了由UHMW-PE制造的固体塑料型材的材料和性能要求和测试方法。 1.2 本规范中包含的特性是所涵盖的成分所需的特性，这些特性来自模制样品或由板材、棒材和型材制成。使用第节中给出的分类系统描述了识别对专业应用重要的特定特征所需的要求 4. . 1.3 本规范允许使用再生塑料（定义见指南 D5033 ). 1.4 这些值以国际单位制表示，并被视为所有属性表中的标准。出于参考目的，英制单位也包括在表S-UHMW-PE和表A中，不一定是完全等效的。 1.5 以下预防性警告仅适用于本规范的试验方法部分。 本标准并非旨在解决与其使用相关的所有安全问题（如有）。 本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管要求的适用性。 注1: 没有已知的ISO等效于本标准。

1.1 This specification covers requirements and test methods for the material and properties of solid plastic shapes manufactured from UHMW-PE. 1.2 The properties included in this specification are those required for the compositions covered and are derived from molded samples or fabricated from sheet, rod and profiles. Requirements necessary to identify particular characteristics important to specialized applications are described by using the classification system given in Section 4 . 1.3 This specification allows for the use of recycled plastics (as defined in Guide D5033 ). 1.4 The values are stated in SI units and are to be regarded as the standard in all property tables. For reference purposes, English units are also included in Table S-UHMW-PE and Table A and are not necessarily exact equivalents. 1.5 The following precautionary caveat pertains only to the test method portions of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. Note 1: There is no known ISO equivalent to this standard.