ISO 10683:2014规定了钢紧固件非电解镀锌片涂层的要求。它适用于涂料: 含或不含六价铬； 有或没有面漆； 有或没有润滑剂（整体润滑剂和/或随后添加的润滑剂）。 它适用于ISO公制螺纹的螺栓、螺钉、螺柱和螺母，非ISO公制螺纹的紧固件，以及非螺纹紧固件，如垫圈、销、夹子等。 ISO 10683:2014没有规定对可焊性或可涂漆性等紧固件性能的要求。它不适用于机械施加的锌涂层。

ISO 10683:2014 specifies requirements for non-electrolytically applied zinc flake coatings for steel fasteners. It applies to coatings:

• with or without hexavalent chromium;
• with or without top coat;
• with or without lubricant (integral lubricant and/or subsequently added lubricant).

It applies to bolts, screws, studs and nuts with ISO metric thread, to fasteners with non-ISO metric thread, and to non-threaded fasteners such as washers, pins, clips, etc. ISO 10683:2014 does not specify requirements for such fastener properties as weldability or paintability. It does not apply to mechanically applied zinc coatings.