ISO 10563:2023-建筑和土木工程密封剂.质量和体积变化的测定-国家数字标准馆

现行 ISO 10563:2023

到馆阅读

收藏跟踪

购买正版

Building and civil engineering sealants — Determination of change in mass and volume 建筑和土木工程密封剂.质量和体积变化的测定

发布日期： 2023-06-21

本文件规定了建筑施工中用于接缝的自流平和不下垂密封剂的质量变化和体积变化的测定方法。
笔记？本试验程序并非旨在确定受试密封剂质量和体积损失的绝对最大值，而是在规定参数下对质量和体积损失的指示性测量。

This document specifies a method for the determination of the change of mass and the change of volume of self-levelling and non-sagging sealants used in joints in building construction.
NOTE？This test procedure is not intended to determine the absolute maximum value of loss of mass and volume of a tested sealant, but it is an indicative measurement of the loss of mass and volume under specified parameters.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 91.100.50建筑材料 - 粘合料、密封材料

关联关系

研制信息

归口单位： ISO/TC 59/SC 8

相似标准/计划/法规

BS ISO 4781-2022

Building and civil engineering sealants. Determination of application life
建筑和土木工程密封剂.使用寿命的测定

BS EN ISO 11432-2021

Building and civil engineering sealants. Determination of resistance to compression
建筑和土木工程密封剂抗压强度的测定

Building and civil engineering sealants — Determination of resistance to compression
建筑和土木工程密封剂.抗压性的测定

Building and civil engineering sealants — Determination of application life
建筑和土木工程密封剂.使用寿命的测定

DIN EN ISO 10563

Buildings and civil engineering works - Sealants - Determination of change in mass and volume (ISO 10563:2017)
建筑物和土木工程.密封剂.质量和体积变化的测定（ISO 10563-2017）

BS ISO 19863-2016

Buildings and civil engineering works. Sealants. Determination of tear resistance
建筑和土木工程密封剂抗撕裂性的测定

BS ISO 19861-2015

Buildings and civil engineering works. Sealants. Determination of curing behaviour
建筑和土木工程密封剂固化性能的测定

BS ISO 4784-2022

Building and civil engineering sealants. Determination of surface cure time
建筑和土木工程密封剂表面固化时间的测定

BS ISO 23869-2021

Building and civil engineering sealants. Determination of self-levelling properties
建筑和土木工程密封剂自流平性能的测定

Building and civil engineering sealants — Determination of self-levelling properties
建筑和土木工程密封剂.自流平性能的测定

Buildings and civil engineering works — Sealants — Determination of tear resistance
建筑和土木工程 - 密封胶 - 抗撕裂性的测定

Buildings and civil engineering works — Sealants — Determination of curing behaviour
建筑与土木工程 - 密封胶 - 固化行为的测定

Building and civil engineering sealants — Determination of surface cure time
建筑和土木工程密封剂.表面固化时间的测定

BS ISO 13638-2021

Building and civil engineering sealants. Determination of resistance to prolonged exposure to water
建筑和土木工程密封剂耐水性的测定

Building and civil engineering sealants — Determination of resistance to prolonged exposure to water
建筑和土木工程密封剂耐水长期暴露性的测定

Buildings and civil engineering works — Sealants — Test method for the determination of stringiness
建筑和土木工程.密封剂.测定细度的试验方法

BS EN ISO 10591-2021

Building and civil engineering sealants. Determination of adhesion/cohesion properties of sealants after immersion in water
建筑和土木工程密封剂浸水后密封剂粘附/粘结性能的测定

Building and civil engineering sealants — Determination of adhesion/cohesion properties of sealants after immersion in water
建筑和土木工程密封剂.浸入水中后密封剂粘附/粘合性能的测定

BS EN ISO 9046-2021

Building and civil engineering sealants. Determination of adhesion/cohesion properties at constant temperature
建筑和土木工程密封剂恒温下粘附/内聚性能的测定

Building and civil engineering sealants — Determination of adhesion/cohesion properties at constant temperature
建筑和土木工程用密封材料常温下粘结性能的测定

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统