BS 9520:1983-直流和低频电连接器质量评定规范:通用数据、试验方法和能力批准程序-国家数字标准馆

现行 BS 9520:1983

到馆阅读

收藏跟踪

购买正版

Specification for electrical connectors of assessed quality for d.c. and low frequency application: generic data, methods of test and capability approval procedures 直流和低频电连接器质量评定规范:通用数据、试验方法和能力批准程序

发布日期： 1983-02-28

适用于主要用于电信和相关电子设备的连接器，规定了与术语和定义、测试程序、检查程序和一般数据有关的强制性要求。还提供了编制详细规范的一般规则。交叉引用:BS 308BS 410BS 646BS 969BS 2011BS 2045BS 3763BS 3939BS 4727BS 5310BS 5775BS 6001BS 9000BS 95213G 100G 178G 192G 195G 199G 202G 210G 212SP 20IEC 130-1IEC 352替代BS 9520:1974。

Applies to connectors intended primarily for use on telecommunication and allied electronic equipment, prescribes mandatory requirements relating to terminology and definitions, test procedures, inspection procedures and general data. Also gives general rules for the preparation of detail specifications.Cross References:BS 308BS 410BS 646BS 969BS 2011BS 2045BS 3763BS 3939BS 4727BS 5310BS 5775BS 6001BS 9000BS 95213G 100G 178G 192G 195G 199G 202G 210G 212SP 20IEC 130-1IEC 352Replaces BS 9520:1974.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with moulded bodies for d.c. and low frequency applications. Full and basic assessment levels
直流和低频用带模制体的经质量评定的矩形电连接器详细规范的编制规则全面和基本评估水平

Rules for the preparation of detail specifications for circular electrical connectors of assessed quality for d.c. and low frequency applications. Full, basic and full plus airframe assessment levels
直流和低频应用的经质量评定的圆形电连接器详细规范的编制规则完整、基本和完整加机身评估等级

Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with integral metal housings for d.c. and low frequency applications. Full and basic assessment levels
直流和低频用带整体金属外壳的经质量评定的矩形电连接器详细规范的编制规则全面和基本评估水平

BS EN 61076-5-2001

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications-In-line sockets with assessed quality. Sectional specification
直流、低频模拟和数字高速数据应用中使用的经质量评估的连接器

BS EN 61076-4-1997

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications-Sectional specification. Printed board connectors
直流、低频模拟和数字高速数据应用中使用的经质量评估的连接器

Rules for the preparation of detail specifications for two-part printed board electrical connectors and board-mounted transition devices of assessed quality for d.c. and l.f. applications: full and basic assessment levels
直流和低频应用的两部分印制电路板电连接器和经质量评定的板装转换装置详细规范的编制规则:全面和基本评定水平

BS EN 61076-4-001-1997

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors-Blank detail specification
经质量评估的连接器用于直流、低频模拟和数字高速数据应用印制板连接器

UNE-EN 61076-2-2001

Connectors for use in d.c. low-frequency analogue and digital highg-speed data applications. Part 2: Circular connectors with assessed quality. Sectional specification.
直流低频模拟和数字高速数据应用中使用的连接器第2部分:经质量评定的圆形连接器分规范

UNE-EN 61076-3-2001

Connectors for use in d.c., low-frequency analogue and digital high-speed data applications -- Part 3: Rectangular connectors with assessed quality - Sectional specification.
直流、低频模拟和数字高速数据应用用连接器第3部分:经质量评定的矩形连接器分规范

GB/T 18501.2-2001

直流和低频模拟及数字式高速数据处理设备用连接器第2部分:有质量评定的圆形连接器分规范
Connectors for use in d.c.，low-frequency analogue and digital high speed data spplications--Part 2:Circular connectors with assessed quality--Sectional specification

UNE-EN 61076-1-1997

CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS. PART 1: GENERIC SPECIFICATION.
经质量评估的连接器用于直流、低频模拟和数字高速数据应用第1部分:通用规范

GB/T 18501.1-2001

有质量评定的直流和低频模拟及数字式高速数据处理设备用连接器第1部分:总规范
Connectors with assessed quality，for use in d.c.，low frequency analogue and in digital high speed data applications--Part 1:Generic specification

BS EN 61076-7-2001

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications-Cable outlet accessories with assessed quality, including qualification and capability approval. Sectional specification
直流、低频模拟和数字高速数据应用中使用的经质量评估的连接器

SJ/T 11306-2005

有质量评定的直流和低频模拟及数字式高速数据处理设备用连接器第4部分:印制板连接器分规范
Connectors with assessed quality,for use in d.c.,low-frequency analogue and in digital high-speed data applications-Part 4:Sectional specification-printed board connectors

IEC 61076-4-1995

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors
具有质量评估的连接器用于直流低频模拟和数字高速数据应用 - 第4部分:分段规格 - 印刷电路板连接器

BS EN 62197-1-2006

Connectors for electronic equipment. Quality assessment requirements-Generic specification
电子设备用连接器质量评估要求

UNE-EN 61076-1/A1-1999

CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 1: GENERIC SPECIFICATION. CAPABILITY APPROVAL.
经质量评估的连接器用于直流、低频模拟和数字高速数据应用第1部分:通用规范能力批准

BS CECC 31300-1983

Harmonized system of quality assessment for electronic components: sectional specification: fixed mica dielectric d.c. capacitors
电子元件质量评定协调体系:分规范:云母介质直流固定电容器

UNE-EN 61076-4-001-1998

CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 4: PRINTED BOARD CONNECTORS. SECTION 001: BLANK DETAIL SPECIFICATION.
经质量评估的连接器用于直流、低频模拟和数字高速数据应用第4部分:印制板连接器第001节:空白详细规范

SJ/T 11307-2005

有质量评定的直流和低频模拟及数字式高速数据处理设备用连接器第4部分：印制板连接器第001篇：空白详细规范
Connectors with assessed quality,for use in d.c.,low-frequency analogue and in digital high-speed data applications-Part 4:Printed board connectors-Section 001:Bland detail specification

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统