1.1 本规程涵盖了ASTM小组委员会B02.07精炼镍和钴及其合金管辖范围内规范的形式和样式。为本小组委员会编制新规范或修订现有规范的任何人应遵循本文概述的惯例和程序。 1.2 本规程是对现行ASTM标准格式和样式（格式手册）的补充 2. . 如果文件之间存在冲突，则应提请B02.07注意。在冲突解决之前，两份文件中更严格的要求将成为先例。 1.3 本文件将使用“规范”一词来描述B02.07标准，因为大多数B02.07标准都是这样分类的。然而，本说明适用于B02.07管辖范围内的任何标准。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This practice covers the form and style for specifications under the jurisdiction of ASTM Subcommittee B02.07 Refined Nickel and Cobalt and Their Alloys. Anyone preparing new or revising existing specifications for this subcommittee shall follow the practices and procedures outlined herein. 1.2 This practice is a supplement to the current edition of Form and Style for ASTM Standards (Form Manual) 2 . If there is a conflict between the documents, then this should be brought to the attention of B02.07. Until the conflict is resolved, the more stringent requirement of the two documents takes precedent. 1.3 The word “specifications” will be used throughout this document to describe B02.07 standards because the majority of B02.07 standards are categorized as such. Nevertheless, the instruction herein applies to any standards under the jurisdiction of B02.07. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.