1.1 本试验方法涵盖工业芳烃对铜带的腐蚀性。 注1: 有关适用于其他石油产品的类似铜带试验，请参见试验方法 D130 和试验方法 D1838 . 1.2 单位-- 以国际单位制表示的数值应视为标准。本标准不包括其他计量单位。 1.3 本标准并不旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 有关具体的危险说明，请参阅第节 8. . 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ====意义和用途====== 5.1 本试验方法适用于设定规格，用作内部质量控制工具，以及用于工业芳烃和相关材料的开发或研究工作。它还指示了可能腐蚀设备的某些腐蚀性物质的存在，如酸性化合物或含硫化合物。

1.1 This test method covers the corrosiveness of industrial aromatic hydrocarbons to a copper strip. Note 1: For a similar copper strip test applicable to other petroleum products, see Test Method D130 and Test Method D1838 . 1.2 Units— The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8 . 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 This test method is suitable for setting specifications, for use as an internal quality control tool, and for use in development or research work on industrial aromatic hydrocarbons and related materials. It also gives an indication of the presence of certain corrosive substances which may corrode equipment, such as acidic compounds or sulfur compounds.