IEC 60352-3:20 20适用于根据第6至8条可用于测试和测量的ID连接，并且由以下材料制成: -适当设计的可访问ID终端， -具有标称直径为0.25 mm至3.6 mm的实心圆形导体的导线， -具有横截面积为0.05 mm2至10mm2的绞合导体的导线， 用于电气和电子设备和部件。 除了测试程序之外，还包括来自工业经验的材料信息和数据，以在规定的环境条件下提供电稳定的连接。 使用中的可访问ID终端有不同的设计和材料。因此，仅规定了端接的基本参数，而电线和完整连接的性能要求则详细规定。本文件的目的是: -在规定的机械、电气和大气条件下确定可接近ID连接的适用性； -当用于进行连接的工具（如果有的话）具有不同的设计或制造时，提供一种比较测试结果的方法。 这第二版取消并取代了1993年出版的第一版。本版构成技术修订版。 与上一版相比，此版本包括以下重大技术变更: a)子条款7.2.2:将接触干扰持续时间限制降低至1 μ s。 b)子条款7.2.3:将接触干扰持续时间限制降低至1 μ s。 c)将第9至13条移至附件A（资料性）。 d)为清楚起见，对数字进行了修订。

IEC 60352-3:2020 is applicable to ID connections which are accessible for tests and measurements according to Clauses 6 through 8 and which are made with:
– appropriately designed accessible ID terminations,
– wires having solid round conductors of 0,25 mm to 3,6 mm nominal diameter,
– wires having stranded conductors of 0,05 mm2 to 10 mm2 cross-sectional area,
for use in electrical and electronic equipment and components.
Information on materials and data from industrial experience is included in addition to the test procedures to provide electrically stable connections under prescribed environmen-tal conditions.
There are different designs and materials for accessible ID terminations in use. For this reason only fundamental parameters of the termination are specified, while the perfor-mance requirements of the wire and the complete connection are specified in full detail.
The purpose of this document is:
– to determine the suitability of accessible ID connections under specified mechanical, electrical and atmospheric conditions;
– to provide a means of comparing test results when the tools used to make the con-nections, if any, are of different designs or manufacture.
This second edition cancels and replaces the first edition published in 1993. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the pre-vious edition:
a) Subclause 7.2.2: reduce the limit of duration of contact disturbance to 1 μs.
b) Subclause 7.2.3: reduce the limit of duration of contact disturbance to 1 μs.
c) Transferred Clauses 9 to 13 to Annex A (informative).
d) The figures were revised for clarity.