BS EN 10303:2015定义了薄无取向磁性钢带和薄板的等级 标称厚度为0.05毫米、0.10毫米、0.15毫米、0.20毫米、0.25毫米、0.27毫米、0.30毫米和 以及标称厚度为0.05 mm的细晶粒取向磁性钢带和薄板， 0.10毫米、0.15毫米和0.18毫米。特别是，它给出了一般要求，磁性， 几何特性、公差和工艺特性，以及检查 程序本欧洲标准适用于最终退火后供应的磁性钢带和薄板 线圈状态，用于构建频率等于或等于的磁路 高于100赫兹。交叉引用:EN 10021EN 10204EN 10251EN 60404-2IEC 60404-2EN 60404- 13IEC 60404-13EN ISO 377ISO 377EN ISO 6892-1ISO 6892-1EN ISO 7799ISO 7799IEC 60050-121IEC 60050-221IEC 60404-10EN 10106EN 10107EN 10252EN 10342EN ISO 2178ISO 2178ASTM A 34/A 34M-01购买本文件时提供的所有当前修改件均包括在内。

BS EN 10303:2015 defines the grades of thin non-oriented magnetic steel strip and sheet in nominal thicknesses of 0,05 mm, 0,10 mm, 0,15 mm, 0,20 mm, 0,25 mm, 0,27 mm, 0,30 mm and 0,35 mm, and of thin grain-oriented magnetic steel strip and sheet in nominal thicknesses of 0,05 mm, 0,10 mm, 0,15 mm and 0,18 mm. In particular, it gives general requirements, magnetic properties, geometric characteristics and tolerances and technological characteristics, as well as inspection procedure.This European Standard applies to magnetic steel strip and sheet supplied in the finally annealed condition in coils and intended for the construction of magnetic circuits used at frequencies equal to or higher than 100 Hz.Cross References:EN 10021EN 10204EN 10251EN 60404-2IEC 60404-2EN 60404-13IEC 60404-13EN ISO 377ISO 377EN ISO 6892-1ISO 6892-1EN ISO 7799ISO 7799IEC 60050-121IEC 60050-221IEC 60404-10EN 10106EN 10107EN 10252EN 10342EN ISO 2178ISO 2178ASTM A 34/A 34M-01All current amendments available at time of purchase are included with the purchase of this document.