밸브 시험－화재 형식 시험 조건
阀门试验防火型试验要求

2005-12-30

Testing of valves — Fire type-testing requirements
阀门试验.防火试验要求

2022-10-27

阀门试验 — 耐火试验要求
Testing of valves-Fire type-testing requirements

2013-11-28

止回阀 耐火试验
Fire type-testing requirement for check valves

2011-05-12

Draft Document - Gas-fired appliances - Commercial appliances - Safety requirements, tests
文件草案.燃气设备.商用设备.安全要求和试验

2020-04-01

Draft Document - Chain connectors - Shakle type connectors - Dimensions, requirements, testing
文件草案.链式连接器.摆动式连接器.尺寸 要求和试验

2007-02-01

Draft Document - Industrial valves - Requirements and testing for metallic valves as pressure accessories; German and English version prEN 16668:2022
文件草案——工业阀门——作为压力附件的金属阀门的要求和试验；德语和英语版本prEN 16668:2022

2022-02-01

Draft Document - Fireplaces fired by solid fuel - Gravimetric fired appliances for pellets and other solid fuels - Requirements and test methods
文件草案.固体燃料燃烧的壁炉.颗粒和其他固体燃料的重量分析燃烧装置.要求和试验方法

2008-09-01

Draft Document - Building valves - Inline hot water supply tempering valves - Tests and requirements; German version prEN 15092:2006
文件草案——建筑阀门——直列式热水供应调节阀——试验和要求；德文版prEN 15092:2006

2006-12-01

Draft Document - Requirements on bodies for emission monitoring at small firing installations - Bodies for periodic testing of performance tested measuring devices
文件草案.小型点火装置排放监测机构的要求.性能测试测量装置的定期试验机构

2010-09-01

Draft Document - Gas Tapping Tees - Part 1: Tapping valves for polyethylene gas pipe systems - Requirements and Tests
文件草案.气体分接三通.第1部分:聚乙烯气体管道系统的分接阀.要求和试验

2020-12-01

Draft Document - Fire extinguishing systems in commercial kitchens - Design and test requirements; German and English version prEN 17446:2019
文件草案——商用厨房灭火系统——设计和试验要求；德语和英语版本prEN 17446:2019

2019-11-01

Draft Document - General purpose lead-acid batteries (valve regulated types) - Part 1: General requirements, functional characteristics - Methods of test (IEC 21/714/CD:2010)
文件草案.通用铅酸蓄电池（阀控式）.第1部分:一般要求 功能特性.试验方法（IEC 21/714/CD:2010）

2010-07-01

Draft Document - Parts for supply systems for consuming units with liquid fuels - Part 3: Safety requirements and tests - Valves and meters; German version prEN 12514-3:2009
文件草案.液体燃料消耗装置供应系统零件.第3部分:安全要求和试验.阀门和仪表；德文版prEN 12514-3:2009

2009-06-01

Draft Document - Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO/FDIS 14631:2021); German and English version prEN ISO 14631:2021
文件草案.冲击改性聚苯乙烯（PS-I）挤压板材.要求和试验方法（ISO/FDIS 14631-2021）；德文和英文版本prEN ISO 14631:2021

2021-04-01

Draft Document - Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 3: Requirements, test conditions and test methods; German and English version prEN 12309-3:2022
文件草案.净热输入不超过70kW的加热和/或冷却用燃气吸附装置.第3部分:要求 试验条件和试验方法；德语和英语版本prEN 12309-3:2022

2022-04-01

Draft Document - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests (IEC 2/1839/CD:2016)
文件草案.旋转电机.第18-41部分:由电压转换器供电的旋转电机中使用的无局部放电电气绝缘系统（I型）.鉴定和质量控制试验（IEC 2/1839/CD:2016）

2016-11-01

Draft Document - Rotating electrical machines - Part 18-41: Qualification and quality control tests for partial discharge free (Type I) electrical insulation systems used in rotating electrical machines fed from voltage converters (IEC 2/1616/CD:2010)
文件草案.旋转电机.第18-41部分:由电压转换器供电的旋转电机用无局部放电（I型）电气绝缘系统的鉴定和质量控制试验（IEC 2/1616/CD:2010）

2011-03-01