CAN/CSA C802-94-配电变压器、电力变压器和干式变压器的最大损耗-国家数字标准馆

现行 CAN/CSA C802-94

到馆提醒

收藏跟踪

购买正版

Maximum Losses for Distribution, Power and Dry-Type Transformers 配电变压器、电力变压器和干式变压器的最大损耗

发布日期： 1994-01-01

1.范围1。1本标准规定了与CSA标准CAN/CSA-C2、CAN/CSA-C9、CAN/CSA-C22类似或所述类型的配电变压器、电力变压器和干式变压器的最大损耗。2个47号，CAN/CSA-C88，CAN/CSA-C227。3，C227。4和C301。1.如相关条款所述，规定的损耗适用于变压器的正常设计，但除此之外，还规定了一些特殊设计的损耗。1.2本标准适用于dist

1. Scope1.1 This Standard specifies maximum losses for distribution, power, and dry-type transformers of types similar to or as described in CSA Standards CAN/CSA-C2, CAN/CSA-C9, CAN/CSA-C22.2 No. 47, CAN/CSA-C88, CAN/CSA-C227.3, C227.4, and C301.1. The losses specified are for normal designs of transformer, as described in the relevant clauses, but in addition losses are specified for some special designs that are also described.1.2 This Standard applies to dist

分类信息

发布单位或类别： -

关联关系

研制信息

相似标准/计划/法规

CSA C9.1-M1981(R2001)

Guide for Loading Dry-Type Distribution and Power Transformers
干式配电变压器和电力变压器加载指南

IEEE C57.12.01-2020

IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers
IEEE干式配电和电力变压器一般要求标准

IEEE C57.12.91-2020

IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
IEEE干式配电变压器和电力变压器标准试验规程

IEEE C57.12.60-2020

IEEE Standard for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution Transformers
IEEE干式电力和配电变压器绝缘系统热评估标准

IEEE C57.94-2015

IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type Distribution and Power Transformers
IEEE干式配电变压器和电力变压器的安装、应用、运行和维护推荐规程

IEEE C57.12.56-1986

IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers
IEEE通风干式电力和配电变压器绝缘系统热评估的标准试验程序

MIL MIL-T-82402 Notice 1-Cancellation

TRANSFORMER, DRY-TYPE, POWER DISTRIBUTION, STEP UP AND STEP DOWN SERVICE, 1000 KVA AND BELOW (NO S/S DOCUMENT)
变压器干式电源分配升压和降压服务 1000 KVA和以下（无S/S文件）

MIL MIL-T-82402

TRANSFORMER, DRY-TYPE, POWER DISTRIBUTION, STEP UP AND STEP DOWN SERVICE, 1000 KVA AND BELOW (NO S/S DOCUMENT)
1000 KVA及以下干式配电升压降压变压器（无S/S文件）

IEEE C57.110-2018

IEEE Recommended Practice for Establishing Liquid Immersed and Dry-Type Power and Distribution Transformer Capability when Supplying Nonsinusoidal Load Currents
IEEE在提供非正弦负载电流时建立浸没式和干式电力和配电变压器能力的推荐规程

UNE 21538-3-1997

THREE-PHASE DRY-TYPE DISTRIBUTION TRANSFORMERS 50 HZ, FROM 100 TO 2 500 KVA, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV. PART 3: DETERMINATION OF THE POWER RATING OF A TRANSFORMER LOADED WITH NON-SINUSOIDAL CURRENT.
三相干式配电变压器 50Hz 100至2500 KVA 设备最高电压不超过36 KV 第3部分:负载非正弦电流的变压器额定功率的测定

DIN EN 50541-2-DRAFT

Draft Document - Three phase dry-type distribution transformers 50 Hz, from 100 to 3150 kVA, with highest voltage for equipment not exceeding 36 kV - Part 2: Determination of the power rating of a transformer loaded with non-sinusoidal current; German version FprEN 50541-2:2012
文件草案——最高电压不超过36 kV的设备用50 Hz、100至3150 kVA的三相干式配电变压器——第2部分:负载非正弦电流的变压器额定功率的测定；德文版FprEN 50541-2:2012

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统