Stationary source emissions. Determination of low range mass concentration of dust-Manual gravimetric method
固定源排放 粉尘低质量浓度范围的测定 手工重量法
发布日期:
2017-11-29
BS EN 13284-1:2017规定了测量低粉尘的标准参考方法(SRM)
标准条件下浓度低于50 mg/m3的管道气体流中的浓度。本欧洲标准主要针对废物排放的气体流制定和验证
焚化炉。更一般地说,它可以应用于其他固定源排放的气体,以及
浓度更高。如果气体中含有不稳定、反应性或半挥发性物质,则测量取决于
采样和过滤处理条件。该方法已在现场试验中得到验证,特别强调了周围的粉尘浓度
5毫克/立方米。现场试验结果见附录A。交叉引用:EN 15259:2007 EN ISO 16911-1(ISO 16911-1:2013)ASISO 16911-
ISO 5725-2 EN ISO 20988(ISO 20988:2007)ASISO 20988购买本文件时可获得的所有现行修改件均包含在购买本文件中。
BS EN 13284-1:2017 specifies the standard reference method (SRM) for the measurement of low dust
concentration in ducted gaseous streams in the concentrations below 50 mg/m3 at standard conditions.This European Standard is primarily developed and validated for gaseous streams emitted by waste
incinerators. More generally, it can be applied to gases emitted from other stationary sources, and to
higher concentrations.If the gases contain unstable, reactive or semi-volatile substances, the measurement depends on the
sampling and filter treatment conditions.This method has been validated in field tests with special emphasis to dust concentrations around
5 mg/m3. The results of the field tests are presented in Annex A.Cross References:EN 15259:2007EN ISO 16911-1 (ISO 16911-1:2013) ASISO 16911-1ISO 5725-2EN ISO 20988 (ISO 20988:2007) ASISO 20988All current amendments available at time of purchase are included with the purchase of this document.