1.1 本规程包含ASTM委员会E20试验方法中包含的温度计校准报告要求。 1.2 本规程涵盖辐射温度计、玻璃管液体温度计、电阻温度计、数字温度计和新型热电偶的校准报告。 注1: 本规程不适用于使用过的热电偶。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 5.1 本规程适用于要求报告温度测量值的所有ASTM试验方法。 5.2 校准报告（无论名称如何）是校准实验室的物理输出。 应准备好测量结果和支持这些结果所需的非技术信息，以确保准确传达和证明结果。 5.3 本规程并不旨在取代其他标准规程的要求，如ISO/IEC 17025或ANSI/NCSL Z540.3。

1.1 This practice contains reporting requirements for thermometer calibrations included in ASTM Committee E20 Test Methods. 1.2 This practice covers reports of calibration for radiation thermometers, liquid-in-glass thermometers, resistance thermometers, digital thermometers, and new thermocouples. Note 1: This practice does not apply to used thermocouples. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 This practice is adequate for use with all ASTM Test Methods which require the reporting of temperature measurements. 5.2 The Report of Calibration, however named, is the physical output of the calibration laboratory. It shall be prepared so that both the results of the measurement(s) and the non-technical information necessary to support those results are conveyed in a manner that ensures accurate communication and justification of the results. 5.3 This practice is not meant to supersede requirements of other standards practice such as ISO/IEC 17025 or ANSI/NCSL Z540.3.