BS ISO 12632:2015规定了湿粘在重新填充瓶子上的标签的渗透性和移除时间的测试方法 并可重复使用，以及打印标签对热碱性溶液的耐受性。测试结果始终涉及由基底、油墨膜和清漆膜（如果存在）组成的系统。本国际标准适用于标签基材和印刷标签。标签基板包括 金属化纸。该测试程序也适用于评估印刷中使用的油墨和纸张 打印标签。本国际标准并非旨在解决所有相关的安全问题（如有） 与它的使用。本国际标准的使用者有责任制定适当的标准 安全和健康实践，并在使用前确定监管限制的适用性。购买本文件时可获得的所有当前修订均包含在购买本文件中。

BS ISO 12632:2015 specifies test methods forpenetrability and removal times of labels that have been wet glued on bottles intended to be refilled and reused, andresistance of printed labels against hot alkaline solution.Test results always deal with systems comprising of substrates, ink films and varnish films if present.This International Standard is valid for label substrates and printed labels. Label substrates include metalized papers. The test procedures are also valid for the evaluation of inks and papers to be used in printing labels.This International Standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this International Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.All current amendments available at time of purchase are included with the purchase of this document.