BS EN IEC 60512-23-3:2019-电气和电子设备用连接器测试和测量-国家数字标准馆

现行 BS EN IEC 60512-23-3:2019

到馆提醒

收藏跟踪

购买正版

Connectors for electrical and electronic equipment. Tests and measurements-Screening and filtering tests. Test 23c: Shielding effectiveness of connectors and accessories. Line injection method 电气和电子设备用连接器测试和测量

发布日期： 2019-03-05

                BS EN IEC 60512-23-3:2019定义了测量屏蔽的标准试验方法
屏蔽连接器或未配备整体屏蔽的连接器的有效性SE
一旦安装了屏蔽附件并用屏蔽电缆端接。交叉引用:IEC 62153-4-6:2017EN IEC 60512-1IEC 60512-1IEC 60050-581IEC TS 62153-4-1:2014购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS EN IEC 60512-23-3:2019 defines a standard test method for measuring the shielding
effectiveness SE of a shielded connector, or of a connector not provided with integral shield
once fitted with a shielding accessory and terminated with a screened cable.Cross References:IEC 62153-4-6:2017EN IEC 60512-1IEC 60512-1IEC 60050-581IEC TS 62153-4-1:2014All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS EN 60512-10-4-2003

Connectors for electronic equipment. Tests and measurements-Test 10d. Electrical overload (connectors)
电子设备用连接器测试和测量

BS EN IEC 60512-1-2018

Connectors for electrical and electronic equipment. Tests and measurements-Generic specification
电气和电子设备用连接器测试和测量

KS C 6040(2024 Confirm)

전자기기용 커넥터 시험방법
电子设备连接器试验方法

KS C 6040(2019 Confirm)

전자기기용 커넥터 시험방법
方法用于该连接器电子装备试验

BS EN 60512-1-3-1997

Connectors for electronic equipment. Tests and measurements. General-Test 1c. Electrical engagement length
电子设备用连接器测试和测量全体的测试1c 电气啮合长度

IEC 60512-1-2018

Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification
电气和电子设备用连接器试验和测量第1部分:总规范

IEC 60512-1-2018 RLV

Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification
电气和电子设备用连接器.试验和测量.第1部分:总规范

BS EN IEC 60512-15-2-2018

Connectors for electrical and electronic equipment. Tests and measurements-Connector tests (mechanical). Test 15b: Insert retention in housing (axial)
电气和电子设备用连接器测试和测量

BS EN 60512-9-2-2012

Connectors for electronic equipment. Tests and measurements-Endurance tests. Test 9b. Electrical load and temperature
电子设备用连接器测试和测量

BS EN IEC 60512-11-1-2019

Connectors for electrical and electronic equipment. Tests and measurements-Climatic tests. Test 11a. Climatic sequence
电气和电子设备用连接器测试和测量

BS EN IEC 60512-8-3-2018

Connectors for electrical and electronic equipment. Tests and measurements-Static load tests (fixed connectors). Test 8c: Robustness of actuating lever
电气和电子设备用连接器测试和测量

BS EN IEC 60512-9-5-2020

Connectors for electrical and electronic equipment. Tests and measurements-Endurance tests. Test 9e: Current loading, cyclic
电气和电子设备用连接器测试和测量

BS EN 60512-2-6-2002

Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests-Test 2f. Housing (shell) electrical continuity
电子设备用连接器测试和测量电气连续性和接触电阻测试

BS EN 60512-15-6-2008

Connectors for electronic equipment. Tests and measurements-Connector tests (mechanical). Test 15f. Effectiveness of connector coupling devices
电子设备用连接器测试和测量

IEC 60512-15-2-2018

Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)
电气和电子设备用连接器 - 试验和测量 - 第15-2部分:连接器试验（机械） - 试验15b:插入壳体内的保持力（轴向）

IEC 60512-9-2-2011

Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature
电子设备连接器 - 测试和测量 - 第9-2部分:耐久性测试 - 测试9B:电气负载和温度

IEC 60512-11-1-2019

Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence
电气和电子设备用连接器.试验和测量.第11-1部分:气候试验.试验11a.气候顺序

BS EN 60512-9-3-2011

Connectors for electronic equipment. Tests and measurements-Endurance tests. Test 9c. Mechanical operation (engaging/separating) with electrical load
电子设备用连接器测试和测量

BS EN 60512-2-3-2002

Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests-Test 2c. Contact resistance variation
电子设备用连接器测试和测量电气连续性和接触电阻测试

IEC 60512-8-3-2018

Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever
电气和电子设备用连接器 - 试验和测量 - 第8-3部分:静载试验（固定连接器） - 试验8c:操纵杆的坚固性

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统